Pembrokeshire · Wales
Bath Resealing in Burton Ferry
Bath, shower and sink resealing with new mould-resistant silicone in Burton Ferry, carried out at your home and guaranteed for a year.
- Missing sealant behind the taps
- An untidy old seal
- Black mould in the sealant
What bath resealing costs
We charge the same across the UK, including Burton Ferry. What changes the price is:
- The type of damage
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- Any details about the material
- Details of any past repairs
- Something in shot to show the size
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Bath resealing in Burton Ferry, done in place
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. We’re frequently asked to fix an untidy old seal and leaks at the edges, on basins & vanity units, baths and wet rooms.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Burton Ferry (SA73)
- Region
- Pembrokeshire
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Burton Ferry
Other services in Burton Ferry
Burton Ferry and nearby
Burton Ferry is about 5 miles east of Milford Haven, in Pembrokeshire. Customers in Burton Ferry get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
Every address in SA73 is within our area. We regularly work on streets such as Trinity Terrace and Barnlake Point and the roads around them. We also travel to Burton (1 mile east), Pembroke Ferry (1 mile south), Neyland (1 mile west), Great Honeyborough (1 mile west) and Houghton (1 mile north). Further out, we also cover Haverfordwest (7 miles north), Milford Haven (5 miles west), The Marsh (7 miles north), Dinbych-y-Pysgod (10 miles east), The Green (10 miles east) and Pill (4 miles west).
Local landmarks in Burton Ferry
Typical jobs here are in homes near Jolly Sailor pub, Church Of Saint Mary and Ysgol Harri Tudur/Henry Tudor School and the streets around them. The closest station to Burton Ferry is Pembroke Dock station, about 1.1 miles south of the centre. Well-known places in the area include Benton Castle (2 miles north-east) and Pembroke Dock Heritage Centre (1.4 miles south-west). Green spaces nearby include Ferry Wood and Pembroke River lower.
- Other local spots include Pembroke Dock: Llanion (1.1 miles south)
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- Gaps so wide they need filling or trims before sealing
- Hidden water damage
- A bath or tray that moves, until its support is fixed
Not sure? Send photos and we will give you a straight answer.
What we work on
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Replace the seal when mould sets in
- Dry the seal after bathing
- Store bottles on a shelf
- Open a window after bathing
Good ventilation is the best protection, and wipe the joints after use to keep mould away.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Burton Ferry: your questions answered
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Can you reseal over the old silicone?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
When can I use the bath after resealing?
Typically after around 24 hours. We confirm before we leave.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
What we are called out for in Burton Ferry
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
If you can see any of these, send us a photo:
- Silicone coming away from the tiles
- An untidy old seal
- Black mould in the sealant
- Missing sealant behind the taps
Comparing quotes
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- Who turns up on the day
- Whether the price covers travel
How the visit works
Arrival times are agreed in advance. Once we are there, the work takes around two hours. The room is left tidy and you’ll know when it can be used.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
