Pembrokeshire · Wales
Bath Re-enamelling for Burton Ferry homes
Full bath re-enamelling and resurfacing at your home in Burton Ferry, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
Bath re-enamelling in Burton Ferry, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you’re dealing with an outdated colour you’d like to change and worn patches where water runs and sits, we can typically put it right.
Every repair is covered by our one-year guarantee, wherever you are in Pembrokeshire.
- Area
- Burton Ferry (SA73)
- County
- Pembrokeshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
We’ll always be straight with you, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Places near Burton Ferry
Also in Burton Ferry
What happens on the day
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
How to get a price
Upload a photo of the damage and one of the whole item, with your SA73 postcode, and we’ll come back with a fixed quote.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Aftercare tips
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Questions from Burton Ferry
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Burton Ferry. The price comes down to:
- The colour and finish to match
- Whether we combine several jobs
- The material
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- Where you are, by postcode
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- What it’s made of, if you know
For a price in Burton Ferry, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Signs you need bath re-enamelling in Burton Ferry
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
Comparing quotes
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- How changes to the job are handled
- How long it needs to cure
Landlord and trade work in Burton Ferry
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Burton Ferry, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Covering Burton Ferry
Burton Ferry is about 5 miles east of Milford Haven, in Pembrokeshire. Anywhere in SA73, we come to you. Our repair technicians cover all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
Our visits in SA73 work the same way as everywhere else we cover. Streets in the area include Trinity Terrace and Barnlake Point, and we cover them all. Nearby, we also work in Burton (1 mile east), Pembroke Ferry (1 mile south), Neyland (1 mile west), Great Honeyborough (1 mile west) and Houghton (1 mile north). Larger places within reach include Haverfordwest (7 miles north), Milford Haven (5 miles west), The Marsh (7 miles north), Dinbych-y-Pysgod (10 miles east), The Green (10 miles east) and Pill (4 miles west).
Near you in Burton Ferry
We visit homes around Jolly Sailor pub, Church Of Saint Mary and Ysgol Harri Tudur/Henry Tudor School. The closest station to Burton Ferry is Pembroke Dock station, roughly 1.1 miles south. Other landmarks nearby include Benton Castle (2 miles north-east) and Pembroke Dock Heritage Centre (1.4 miles south-west). The countryside around Burton Ferry includes Ferry Wood and Pembroke River lower.
- Other local spots include Pembroke Dock: Llanion (1.1 miles south)
About our accreditations · Every repair comes with a one-year guarantee.
