Pembrokeshire · Wales
Bath chip & crack repair in Burton Ferry, Pembrokeshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Burton Ferry, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- Deep scratches in acrylic
Bath repair in Burton Ferry, done in place
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. If you’re dealing with chips along the edge of the bath and hairline or through cracks in acrylic, we can generally put it right, whatever the material.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Burton Ferry (SA73)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Replacing a fitted bath generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why Burton Ferry customers choose us
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Most jobs done in one visit
- Repair technicians who travel to you, UK-wide
Read our pricing or bath cost comparison.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When we would advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Do you need bath repair in Burton Ferry?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Customers usually contact us about:
- Chips caused by builders
- A chip where the taps sit
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
Questions to ask before you book
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
Towns and villages near Burton Ferry
More services for Burton Ferry
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes two to three hours for most chips. If anything looks different from your pictures, we will talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Point us to the nearest place to park
- Let us know about parking or access
- Tell us if there are stairs or a lift
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About Burton Ferry
Burton Ferry is about 5 miles east of Milford Haven, in Pembrokeshire. Jobs in Burton Ferry are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Burton Ferry is one of 223 places in Pembrokeshire we cover.
Our repair technicians cover all of SA73. Whether you live on Trinity Terrace and Barnlake Point or anywhere nearby, we can come to you. Neighbouring places we cover include Burton (1 mile east), Pembroke Ferry (1 mile south), Neyland (1 mile west), Great Honeyborough (1 mile west) and Houghton (1 mile north). Further out, we also cover Haverfordwest (7 miles north), Milford Haven (5 miles west), The Marsh (7 miles north), Dinbych-y-Pysgod (10 miles east), The Green (10 miles east) and Pill (4 miles west).
What’s near Burton Ferry
We visit homes around Jolly Sailor pub, Church Of Saint Mary and Ysgol Harri Tudur/Henry Tudor School and the streets around them. The nearest railway station is Pembroke Dock station, roughly 1.1 miles south of the centre. Other landmarks nearby include Benton Castle (2 miles north-east) and Pembroke Dock Heritage Centre (1.4 miles south-west). For a walk, there’s Ferry Wood and Pembroke River lower.
- Other local spots include Pembroke Dock: Llanion (1.1 miles south)
What affects the price in Burton Ferry
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- Unusual colours or finishes
- What the surface is made of
- What kind of damage it is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath
- One sharp close-up of the damage
- Natural light rather than flash
- Any details about the material
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Questions from Burton Ferry
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
How much does bath repair cost in Burton Ferry?
Prices start from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SA73 postcode.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
About our accreditations · Every repair comes with a one-year guarantee.
