East Dunbartonshire · Scotland
Bath & shower resealing (mastic) in Cadder, East Dunbartonshire
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Cadder. Send photos for a free, fixed quote.
- Silicone smeared on tiles
- Silicone coming away from the tiles
- Gaps by the taps
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Movement in the bath or tray
- Tiles that move, until they’re refixed
- Gaps so wide they need filling or trims before sealing
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
How we handle bath resealing in Cadder
We reseal baths with them filled with water, so the joint opens fully, so the seal does not tear when the bath is first used. We’re frequently asked to fix leaks at the edges and unsealed corners, across baths, kitchen worktops & sinks and shower trays & enclosures.
Whatever the size of the job, it’s backed by a one-year guarantee in Cadder and across East Dunbartonshire.
- Area
- Cadder (G64)
- Region
- East Dunbartonshire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Run the extractor fan during and after showers
- Replace the seal when mould sets in
- Do not stand toiletries on the seal
- Keep the joints dry
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Nearby places to Cadder
What else we do in Cadder
Questions from Cadder
Which areas do you work in?
We work UK-wide, so Cadder is covered. Prices don’t change with location.
What does bath resealing cost?
We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Why does mould come back so fast?
Damp is the cause. Ventilation and drying keep it clean longer.
My seal keeps tearing. Why?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
How long does silicone take to cure?
We’ll give you the curing time, typically around a day.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
About Cadder
Cadder is about 1 mile north of Bishopbriggs, in East Dunbartonshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Cadder is one of 23 towns and villages in East Dunbartonshire where we work.
All of G64 is covered, from the main roads to the quietest streets. That includes homes on Hilton Road, Yarrow Road and Cadder Road. Nearby, we also work in Bishopbriggs (1 mile south), Balmore (1 mile north-west), Torrance (1 mile north), Bardowie (2 miles north-west) and Summerston (3 miles south-west). We also work in nearby towns such as Kirkintilloch (3 miles east), Bearsden (4 miles west), Lenzie (3 miles east), Milngavie (4 miles west), Lennoxtown (4 miles north) and Milton of Campsie (4 miles north-east).
Around Cadder
We visit homes around Cadder Parish Church and Bishopbriggs Academy. The nearest railway station is Bishopbriggs station, roughly 1.1 miles south of the centre. Well-known places in the area include Barony Chambers Museum (2.7 miles north-east) and Stobhill Hospital (1.8 miles south). Green spaces nearby include Gadloch and Lenzie Moss.
Do you need bath resealing in Cadder?
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
The most common problems we’re called about are:
- Black mould in the sealant
- Silicone smeared on tiles
- Damp near the bath
- Unsealed corners
What to look for in a quote
- Whether a trained technician does the job
- Whether the price covers travel
- What prep work is covered
- What the guarantee covers, and for how long
What affects the price in Cadder
Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- Access to the area
- The material
- How many items we do on one visit
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Quotes from your photos
We price nearly every job from pictures. This is what to send:
- One picture of the entire bath or shower
- One sharp close-up of the damage
- Details of any past repairs
- Where you are, by postcode
Most clients in Cadder get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Landlords, agents and businesses in Cadder
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Cadder use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Is resealing worth it?
Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- Typically one visit, start to finish
- A year’s guarantee on all work
- No extra charge for your area
- CHAS and Constructionline accredited
See our full price list.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow around two hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Have a window or extractor fan available
Get a quote
Upload a photo of the damage and one of the whole item, with your G64 postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
