Cheshire East · England
Bath Resealing for Calrofold homes
Our repair technicians come to Calrofold for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Discoloured, yellow sealant
- Silicone smeared on tiles
- Gaps in the seal
Calrofold: your questions answered
How long does resealing take?
A bath or shower usually takes a couple of hours. Leave it to cure before use.
Will there be a smell?
There may be a mild smell during the work.
What does bath resealing cost?
Because every job differs, we price from pictures. You know the full cost before anything is booked.
What areas do you cover?
We cover the entire UK, including Calrofold and the rest of Cheshire East. Send your postcode with your photos and we’ll offer you dates.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do you cover Calrofold?
Yes. We cover the entire UK and travel to Calrofold. Send photos and we’ll quote, or call 0345 017 0787.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our bath resealing in Calrofold
We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Our technicians work on wet rooms, baths and shower trays & enclosures, and common reasons people contact us are discoloured, yellow sealant and water getting behind the bath or tray.
You get a one-year guarantee, the same in Calrofold as everywhere else we work.
- Where
- Calrofold (SK11)
- Region
- Cheshire East
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Calrofold
Calrofold is about 2 miles east of Macclesfield, in Cheshire East. Clients in Calrofold get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Calrofold is one of 254 towns and villages in Cheshire East we cover. Our jobs stretch from Calrofold to Manchester (about 15 miles away).
We work across SK11 and the streets around it. Other places close to Calrofold include Kerridge-end (1 mile north), Brookhouse (1 mile north-east), Rainow (1 mile north-east), Walker Barn (1 mile south-east) and Kerridge (2 miles north). Larger places within reach include Congleton (9 miles south-west), Wilmslow (7 miles north-west), Knutsford (12 miles west), Sandbach (14 miles south-west), Poynton (6 miles north) and Holmes Chapel (12 miles south-west).
Near you in Calrofold
We visit homes around Holy Trinity Church, Victoria Park and Rainow Primary School. For rail, the closest station is Macclesfield station, about 1.6 miles south-west of the centre. A little further out are Duke's Court (1.8 miles south-west) and Silk Museum (1.8 miles south-west). For a walk, there’s Kerridge Hill and Trentabank Reservoir Nature Reserve.
- Parks and local facilities nearby include Macclesfield (1.8 miles west)
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Places near Calrofold
What else we do in Calrofold
Landlord and trade work in Calrofold
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Looking after it afterwards
Nothing complicated is needed:
- Run the extractor fan during and after showers
- Dry the seal after bathing
- Reseal when black spots won’t clean off
- Let steam out after showers
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
How we price bath resealing
We give every job a fixed price from pictures. These are the things that affect it:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- The colour and finish to match
- How easy the damage is to reach
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- A wider photo showing the whole bath or shower
- Any details about the material
- Where you are, by postcode
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Resealing in Calrofold: why it matters
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. We charge the same wherever you are, so there is no premium for Calrofold. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
- Straight answers about what a repair can do
Read our prices page.
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to about two hours for a bath, including clearing up.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Getting a price
Send us pictures of the damage and a wider shot of the entire item, with your SK11 postcode, and we’ll reply with a fixed quote.
Advice
What a repair can’t fix
It helps to know what we can’t do:
- Hollow or loose tiles
- Water damage behind the bath that needs a builder
- A bath or tray that moves, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
About our accreditations · Every repair comes with a one-year guarantee.
