Cheshire East · England
Bath & shower resealing (mastic) in Kerridge-end, Cheshire East
Bath resealing across Kerridge-end and nearby, usually in one visit and guaranteed for a year.
- Gaps in the seal
- An untidy old seal
- Black spots in the silicone
Is resealing worth it?
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Why us?
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Every repair guaranteed for a year
See our full price list.
About our bath resealing in Kerridge-end
Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours. Our technicians work on baths, kitchen worktops & sinks and shower trays & enclosures, and people most frequently call us about a messy previous reseal and black spots in the silicone.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Kerridge-end (SK10)
- County
- Cheshire East
- Warranty
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Kerridge-end
Kerridge-end is about 2 miles north-east of Macclesfield, in Cheshire East. Jobs in Kerridge-end are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Kerridge-end is one of 254 places in Cheshire East where we work. Our jobs stretch from Kerridge-end to Manchester (15 miles away).
Our visits in SK10 are booked in the same way as anywhere else. Whether you live on Lidgetts Lane and Rainow Road or a nearby road, we can come to you. Other places close to Kerridge-end include Brookhouse (1 mile north-east), Calrofold (1 mile south), Rainow (1 mile north-east), Kerridge (1 mile north-west) and Walker Barn (1 mile south-east). Larger places within reach include Congleton (9 miles south-west), Wilmslow (7 miles north-west), Knutsford (12 miles west), Sandbach (15 miles south-west), Poynton (5 miles north) and Holmes Chapel (12 miles south-west).
What’s near Kerridge-end
Typical jobs here are in homes near The Robin Hood Inn, Victoria Park and Tytherington School, among other places. Nearby too are Rainow Primary School (0.5 miles north-east) and Holy Trinity Church (0.6 miles north-east). The nearest railway station is Macclesfield station, about 1.8 miles south-west of the centre. Other landmarks nearby include Duke's Court (2.1 miles south-west) and Macclesfield Castle (2 miles south-west). The countryside around Kerridge-end includes Trentabank Reservoir Nature Reserve and Kerridge Hill.
- Local facilities include Macclesfield (2 miles south-west)
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire East and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Nearby places to Kerridge-end
More services for Kerridge-end
How to look after the repair
Most damage we see is avoidable. These habits help:
- Open a window after bathing
- Keep bottles off the joints
- Ventilate the bathroom well
- Keep the joints dry
Keep the room well ventilated, and wipe the joints after use so mould struggles to take hold.
Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, for the same reason.
When we’d advise against a repair
In fairness, there are a few things a repair won’t fix:
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
- Gaps so wide they need filling or trims before sealing
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
FAQs for Kerridge-end
Do you seal over the old sealant?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How long will it take?
Around two hours for a bath, then it needs to cure.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
How long does silicone take to cure?
Normally after around 24 hours. We’ll tell you the exact time.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
How do I get a price for bath resealing in Kerridge-end?
Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Why does my sealant keep splitting?
Movement is the usual cause. We seal baths full of water.
How we price bath resealing
We do not charge extra for travel to Kerridge-end. The price depends on:
- How much damage there is
- The material
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- A wider photo showing the whole bath or shower
- A clear, close picture of the problem area
- Something in shot to show the size
- Where you are, by postcode
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take around two hours, and you can get on with other things while we are there.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Signs you need bath resealing in Kerridge-end
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.
Keep an eye out for these signs:
- Water getting behind the bath or tray
- Gaps by the taps
- Gaps in the seal
- A messy previous reseal
Questions to ask before you book
- How the colour is matched
- What preparation is included
- How long the guarantee is and what it covers
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
