Cambridgeshire · England

Bath Resealing in Chrishall

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Chrishall. Send pictures for a free, fixed quote.

  • Silicone coming away from the tiles
  • Water getting behind the bath or tray
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Chrishall

Bath resealing in Chrishall, done in place

Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, plus curing time. We work on basins & vanity units, wet rooms and kitchen worktops & sinks, and people most often call us about gaps by the taps and sealant that’s split or lifting.

Your repair is guaranteed for a year, as with every job we do.

Location
Chrishall (SG8)
Area hub
Cambridgeshire
Cover
A year, on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Different materials, different repairs

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Open a window after bathing
  • Dry the seal after bathing
  • Run the extractor fan during and after showers
  • Reseal at the first sign of lifting

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

What we’re called out for in Chrishall

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.

You may need us if you’ve spotted any of these:

  • A messy previous reseal
  • Leaks at the edges
  • Stained silicone
  • Unsealed corners

What your quote should include

  • What preparation is included
  • How long it needs to cure
  • How long the guarantee is and what it covers
  • Aftercare advice

10 questions to ask before you book

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for about two hours for a bath from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. First we strip out every bit of the old mastic.
  2. The joint is cleaned and any mould treated.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Plan for the room to be out of bounds to pets and children

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed price

Read more

When a repair is not the answer

Not everything can be repaired, and we’ll tell you before we start. We can’t fix:

  • Loose tiles, which need refixing first
  • A flexing bath
  • Gaps too big for silicone alone

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we repair

  • Wet rooms
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures

Resealing in Chrishall: why it matters

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Why Chrishall clients choose us

  • Most jobs done in one visit
  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Repair technicians who travel to you, UK-wide

Read our prices page.

Where we work around Chrishall

Chrishall is about 6 miles east of Royston, in Cambridgeshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Chrishall is one of 371 towns and villages in Cambridgeshire we cover. Our jobs stretch from Chrishall to London (38 miles away).

All of SG8 is covered, from the main roads to the quietest streets. Whether you live on High Street, Church Road and Hog's Lane or a nearby road, a technician can come to you. Other places close to Chrishall include Crawley End (1 mile north), Elmdon (1 mile east), Upper Pond Street (2 miles south-east), Bridge Green (2 miles south-east) and Ickleton (4 miles north-east). Within a short drive, we also cover Cambridge (12 miles north), Royston (6 miles west), Cambourne (15 miles north-west), King's Hedges (14 miles north), Arbury (13 miles north) and Chesterton (13 miles north).

Around Chrishall

Typical jobs here are in homes near The Red Cow pub and Church of the Holy Trinity, among other places. For rail, the closest station is Great Chesterford station, about 4.2 miles north-east of the centre. Further afield, we also cover the area around The Warren (3.5 miles south-west). Open spaces near Chrishall include Fowlmere RSPB reserve.

Map of Chrishall © OpenStreetMap contributors

Common questions in Chrishall

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Why does my sealant keep splitting?

Movement is the usual cause. We seal baths full of water.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote with dates.

How long will it take?

Around two hours for a bath, plus curing time.

Can you reseal over the old silicone?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

How we price bath resealing

You’ll know the full cost before you book. We take into account:

  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs

The price reflects the work involved, not your postcode. The full price is agreed before booking.

Send pictures for a quote

You can normally get a fixed quote without us visiting. To help us price it:

  • Any earlier repairs or coatings
  • One picture of the entire bath or shower
  • The material, if you know it
  • Where you are, by postcode

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.

Landlord and trade work in Chrishall

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.