Somerset · England
Bath & shower resealing (mastic) in Clewer, Somerset
Local bath resealing for Clewer: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Leaks at the edges
- Black mould in the sealant
- Sealant that’s split or lifting
Bath resealing at your home in Clewer
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Common call-outs are for missing sealant behind the taps and a messy previous reseal, on shower trays & enclosures, kitchen worktops & sinks and wet rooms.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Clewer (BS28)
- Region
- Somerset
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Clewer
Clewer is about 7 miles north-west of Wells, in Somerset. From the centre of Clewer to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 640 places in Somerset.
We work across the BS28 postcode area and the streets around it. Close by, we cover Crickham (1 mile south-west), Cocklake (1 mile south), Brinscombe (1 mile north-west), Alston Sutton (2 miles west) and Ashton (2 miles south-west). Larger places within reach include Bridgwater (12 miles south-west), Burnham-on-Sea (8 miles west), Wells (7 miles south-east), Midsomer Norton (14 miles east), Shepton Mallet (12 miles south-east) and Street (10 miles south).
Around Clewer
Typical jobs here are in homes near The Kings of Wessex Academy and The Trotter Inn and the streets around them. Nearby you’ll also find Goughs Motor Museum (2.2 miles north-east). Open spaces near Clewer include Kingswood and Wavering Down.
Nearby places to Clewer
More services for Clewer
When to call us in Clewer
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
If you can see any of these, send us a picture:
- Black mould in the sealant
- Stained silicone
- Water getting behind the bath or tray
- Missing sealant behind the taps
Before booking anyone
- What preparation is included
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Who turns up on the day
Clewer questions
What does bath resealing cost?
We give a fixed price from your photos. Send a close-up and a photo of the whole item with your BS28 postcode.
What do you need from me?
Photos of the damage, a picture of the whole bath or shower and your postcode. Then we’ll agree a date.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Do you come to Clewer?
Yes, we do. We send a technician to Clewer for every job, with no extra charge for travel.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What areas do you cover?
Across the UK, so Clewer is covered. Our prices are the same everywhere.
How to care for the repair
Simple care helps the repair last. We recommend:
- Don’t stand toiletries on the seal
- Air the room after use
- Dry the seal after bathing
- Clean the sealant gently and regularly
Let it cure fully before using the bath or shower, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.
Landlords, agents and businesses in Clewer
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What we can’t put right
In fairness, some problems need a different fix:
- Water damage behind the bath that needs a builder
- Very wide gaps that need a trim
- A flexing bath
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Baths
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a couple of hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Open a window if you can
- Ensure the area is dry
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
What bath resealing costs
There is no charge for travel to Clewer. The price comes down to:
- Any earlier repairs that need removing first
- The type of damage
- What the surface is made of
- Unusual colours or finishes
The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- A wider photo showing the whole bath or shower
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
