Wiltshire · England
Bath Resealing in Collingbourne Kingston
Bath resealing across Collingbourne Kingston and nearby, done in a single visit in most cases.
- Old sealant that looks dirty
- Mould you cannot clean out
- A messy previous reseal
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes about two hours for a bath, and we leave the room as we found it.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Let the surface dry out before the visit
- Let us know about parking or access
- Let us know if it has been repaired before
Get a quote
For a price in Collingbourne Kingston, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Bath resealing at your home in Collingbourne Kingston
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, as one neat, continuous bead. If you are dealing with missing sealant behind the taps and water getting behind the bath or tray, we can normally put it right.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Collingbourne Kingston (SN8)
- Area hub
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Collingbourne Kingston
What else we do in Collingbourne Kingston
Why reseal now?
Putting new silicone over old doesn’t last. It peels within weeks, and traps mould underneath. A proper reseal removes the old first. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Fixed prices from your pictures
- Work done at your home or business
- Everything repaired in place
- No extra charge for your area
Take a look at our full price list.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What bath resealing costs
We price every job individually. The main factors are:
- The material
- Access to the area
- Doing more than one item at once
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
About Collingbourne Kingston
Collingbourne Kingston is about 10 miles north-west of Andover, in Wiltshire. Whether you are in the middle of Collingbourne Kingston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Collingbourne Kingston is one of 425 places in Wiltshire we cover. We work right across the region, from Collingbourne Kingston to London (69 miles away).
All of SN8 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Marlborough Road, Mill Drove and Parsonage Vale. Neighbouring places we cover include Cadley (1 mile south-east), Collingbourne Ducis (1 mile south), Ludgershall (3 miles south-east), Tidworth (4 miles south) and Perham Down (4 miles south). We also work in nearby towns such as Devizes (15 miles west), Amesbury (10 miles south-west), Marlborough (9 miles north), Old Sarum (14 miles south-west), Bulford (8 miles south-west) and Pewsey (5 miles north-west).
Around Collingbourne Kingston
Our customers here include homes close to Church of St Mary and Collingbourne Church of England Primary School. Further afield, we also cover the area around Ludgershall Castle (3.1 miles south-east).
Collingbourne Kingston: your questions answered
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Wiltshire.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
How long does resealing take?
Normally a couple of hours, plus curing time.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
When can I use the bath after resealing?
Typically after around 24 hours. We will tell you the exact time.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What a repair cannot fix
We will always be straight with you, so here’s what a repair won’t do:
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
- Tiles that move, until they’re refixed
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Collingbourne Kingston
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
Aftercare tips
After the repair has cured, a few habits help it last:
- Replace the seal when mould sets in
- Clean the sealant gently and regularly
- Run the extractor fan during and after showers
- Dry the seal after bathing
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Signs you need bath resealing in Collingbourne Kingston
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
If you can see any of these, send us a photo:
- Old sealant that looks dirty
- Damp near the bath
- Gaps in the seal
- Missing sealant behind the taps
Comparing quotes
- Is the price fixed, and does it include VAT?
- How the colour is matched
- Who will actually do the work
- Whether cleaning and preparation are in the price
Landlord and trade work in Collingbourne Kingston
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Collingbourne Kingston use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
