Wiltshire · England
Bath Re-enamelling for Collingbourne Kingston homes
Our technicians come to Collingbourne Kingston for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
How to look after the repair
Most damage we see is avoidable. A few tips:
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How we handle bath re-enamelling in Collingbourne Kingston
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include a bath that stays dull however much you clean it and several chips and rust patches, in Victorian roll-tops, cast iron baths and pressed steel baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Collingbourne Kingston (SN8)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Collingbourne Kingston
What else we do in Collingbourne Kingston
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Collingbourne Kingston questions
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Our work in Collingbourne Kingston
Collingbourne Kingston is about 10 miles north-west of Andover, in Wiltshire. Jobs in Collingbourne Kingston are booked in like any other job: a fixed price from your photos, then a visit to do the work. Collingbourne Kingston is one of 425 towns and villages in Wiltshire we cover. Our jobs stretch from Collingbourne Kingston to London (about 69 miles away).
Postcode districts we cover here: SN8. Streets in the area include Marlborough Road, Mill Drove and Parsonage Vale, and we cover them all. We also travel to Cadley (1 mile south-east), Collingbourne Ducis (1 mile south), Ludgershall (3 miles south-east), Tidworth (4 miles south) and Perham Down (4 miles south). We also work in nearby towns such as Devizes (15 miles west), Amesbury (10 miles south-west), Marlborough (9 miles north), Old Sarum (14 miles south-west), Bulford (8 miles south-west) and Pewsey (5 miles north-west).
Around Collingbourne Kingston
In Collingbourne Kingston, that means homes near Church of St Mary and Collingbourne Church of England Primary School and the streets around them. A little further out are Ludgershall Castle (3.1 miles south-east).
What affects the price in Collingbourne Kingston
Prices start from £350. We charge the same across the UK, including Collingbourne Kingston. The price reflects:
- The material and finish
- What kind of damage it is
- Where the damage is and how we get to it
- How hard the colour is to match
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- Any details about the material
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
Upload a picture of the damage and a wider shot of the entire item, with your SN8 postcode, and we’ll come back with a fixed quote.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Landlords, agents and businesses in Collingbourne Kingston
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Collingbourne Kingston use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear the area around the damage
- Let us know about parking or access
- Keep children and pets away from the room on the day
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
