Warwickshire · England
Bath Resealing in Compton Verney
Bath resealing in Compton Verney without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Missing sealant behind the taps
- Black spots in the silicone
- Silicone smeared on tiles
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Bath resealing in Compton Verney, done in place
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. If you’re dealing with black mould in the sealant and old sealant that looks dirty, we can usually put it right, on baths, basins & vanity units and shower trays & enclosures alike.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Compton Verney (CV35)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath resealing in Compton Verney?
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
These are the problems we are asked about most:
- Gaps in the seal
- Discoloured, yellow sealant
- Leaks at the edges
- Black mould in the sealant
Comparing quotes
- How the colour is matched
- How changes to the job are handled
- How to care for the finish
- Whether there are any call-out or travel charges
Towns and villages near Compton Verney
Also in Compton Verney
Why reseal now?
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- We leave the room as we found it
See our prices page.
About Compton Verney
Compton Verney is about 7 miles east of Stratford-upon-Avon, in Warwickshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Compton Verney is one of 324 towns and villages in Warwickshire where we work. We work right across the region, from Compton Verney to Birmingham (about 25 miles away).
Here we cover the CV35 postcode area. We also travel to Combrook (1 mile south), Walton (2 miles west), Butlers Marston (2 miles south), Kineton (2 miles south-east) and Little Kineton (2 miles south-east). Further out, we also cover Warwick (8 miles north), Royal Leamington Spa (8 miles north), Stratford-upon-Avon (7 miles west), Leamington Spa (8 miles north), Kenilworth (12 miles north) and Southam (9 miles north-east).
What’s near Compton Verney
Our clients here include homes close to Church of St Mary and St Margaret and Kineton High School, among other places. A little further out are Warwickshire Museum of Rural Life (1.7 miles north) and King John's Castle (1.7 miles south-east).
What bath resealing costs
We don’t charge extra for travel to Compton Verney. The price depends on:
- How many items we do on one visit
- The type of damage
- The material
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any earlier repairs or coatings
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A flexing bath
- Loose tiles, which need refixing first
- Gaps too big for silicone alone
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
Repairs by material
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Your questions about bath resealing in Compton Verney
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
How long does silicone take to cure?
Normally about a day later. We’ll tell you the exact time.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can new silicone go over old?
We always remove the old sealant completely. Fresh silicone doesn’t stick to old.
How long does resealing take?
Around two hours for a bath, then it needs to cure.
How much does bath resealing cost in Compton Verney?
We give a fixed price from your photos. Send a close-up and a picture of the whole item with your CV35 postcode.
Why does my sealant keep splitting?
Normally because the bath or tray moves. We fill the bath before sealing it.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take around two hours, and you’re welcome to carry on with your day while we work.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
How to care for the repair
Simple care helps the repair last. Our advice:
- Keep the joints dry
- Give the seal a regular clean
- Let steam out after showers
- Keep bottles off the joints
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
