Warwickshire · England

Bath Resealing in Little Kineton

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Little Kineton and across Warwickshire. Free, fixed quotes from your photos.

  • Leaks at the edges
  • Mould you cannot clean out
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Little Kineton

Bath resealing in Little Kineton, done in place

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Our technicians work on baths, basins & vanity units and shower trays & enclosures, and people most often call us about leaks at the edges and a messy previous reseal.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Where
Little Kineton (CV35)
Region
Warwickshire
Warranty
One year on every repair
Price
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

FAQs for Little Kineton

Which areas do you work in?

All of Warwickshire, and the rest of the UK. There’s no extra charge for travel.

Can you redo someone else’s repair?

Typically, yes. The old repair comes out first, so mention it when you send pictures.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

How long will it take?

A bath or shower generally takes a couple of hours. Leave it to cure before use.

How do I get a price for bath resealing in Little Kineton?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can I add another job to the visit?

Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.

Is there any odour?

There may be a mild smell during the work that clears as it cures.

Do you work in Little Kineton?

Yes. We work across the UK and travel to Little Kineton and the rest of Warwickshire. Send us photos for a fixed quote, or call 0345 017 0787.

Covering Little Kineton

Little Kineton is about 9 miles east of Stratford-upon-Avon, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Little Kineton is one of 324 towns and villages in Warwickshire where we work. We work right across the region, from Little Kineton to Birmingham (27 miles away).

Jobs in CV35 are booked in the same way as anywhere else. That includes homes on Red Road, Tysoe Road and Walnut Close. Nearby, we also work in Kineton (1 mile north), Butlers Marston (1 mile west), Combrook (2 miles north-west), Compton Verney (2 miles north-west) and Pillerton Hersey (2 miles south-west). We also work in nearby towns such as Warwick (9 miles north), Royal Leamington Spa (10 miles north), Stratford-upon-Avon (9 miles west), Leamington Spa (10 miles north), Kenilworth (14 miles north) and Southam (9 miles north-east).

Around Little Kineton

Our customers here include homes close to Kineton High School, Kineton CofE (VA) Primary School and Church of St Peter. Further afield, we also cover the area around Compton Verney (2.1 miles north-west) and King John's Castle (0.5 miles north-west). For a walk, there is Edge Hill.

Map of Little Kineton © OpenStreetMap contributors

What affects the price in Little Kineton

We charge the same across the UK, including Little Kineton. What changes the price is:

  • Doing more than one item at once
  • The material and finish
  • How many areas need work
  • Where the damage is and how we get to it

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Send photos for a quote

Before you send pictures, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • Any details about the material
  • A close-up of the damage, in focus

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for about two hours for a bath. Before leaving, we tell you how long to leave it and how to care for it.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Ensure the area is dry
  • Have somewhere for us to park nearby if possible

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Related advice

Common problems we fix in Little Kineton

Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.

It’s worth getting a quote if you see:

  • Silicone coming away from the tiles
  • Damp near the bath
  • An untidy old seal
  • Discoloured, yellow sealant

Questions to ask before you book

  • Whether a trained technician does the job
  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price

Our hiring checklist

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Keep bottles off the joints
  • Open a window after bathing
  • Clean the sealant gently and regularly
  • Dry the seal after bathing

Good ventilation is the best protection, and wipe the joints after use to keep mould away.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

What we cannot put right

In fairness, some problems need a different fix:

  • Gaps so wide they need filling or trims before sealing
  • Rotten walls or floors behind the bath
  • A flexing bath

Send us photos and we will tell you honestly.

Materials we repair

  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.