Cumbria · England
Bath & shower resealing (mastic) in Eaglesfield, Cumbria
Bath resealing for Eaglesfield, without a refit. Send us pictures for a fixed price, then we come to you.
- Discoloured, yellow sealant
- Black spots in the silicone
- Gaps by the taps
What bath resealing costs
We give every job a fixed quote from photos. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- How easy the damage is to reach
- How hard the colour is to match
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Quotes from your photos
Two or three clear pictures are normally enough. Try to include:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath or shower
- Where you are, by postcode
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Bath resealing in Eaglesfield without replacing anything
A reseal is a small job that makes a big difference. Fresh joints make the whole room look cleaner, and they protect the walls and floor. Typical jobs include missing sealant behind the taps and stained silicone, in shower trays & enclosures, baths and basins & vanity units.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Eaglesfield (CA13)
- County
- Cumbria
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Eaglesfield
What happens once I’ve sent pictures?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Why does mould come back so fast?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
When can I use the bath after resealing?
We will give you the curing time, normally around a day.
Also near Eaglesfield
Also in Eaglesfield
Eaglesfield and the surrounding area
Eaglesfield is about 6 miles east of Workington, in Cumbria. Clients in Eaglesfield get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Eaglesfield is one of 438 towns and villages in Cumbria we cover. Our jobs stretch from Eaglesfield to Newcastle upon Tyne (about 74 miles away).
Postcode districts we cover here: CA13. Local streets include Barkers Meadow and Dalton Lane, and we cover them all. Nearby, we also work in Brigham (1 mile north-west), Greysouthen (2 miles west), Broughton Cross (2 miles north-west), Bridgefoot (2 miles west) and Great Broughton (2 miles north-west). Further out, we also cover Workington (6 miles west), Whitehaven (10 miles south-west), Maryport (6 miles north-west), Keswick (11 miles east), Moorclose (6 miles west) and Cleator Moor (10 miles south-west).
Local landmarks in Eaglesfield
In Eaglesfield, that means homes near St Philip's and the streets around them. A little further out are Cockermouth Castle (2.3 miles north-east) and The Printing House Museum (2.1 miles north-east). For a walk, there’s Loweswater.
What a repair can’t fix
It helps to know what we can’t do too:
- Water damage behind the bath that needs a builder
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Do you need bath resealing in Eaglesfield?
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
Keep an eye out for any of the following:
- A messy previous reseal
- Missing sealant behind the taps
- Sealant that’s split or lifting
- Stained silicone
What to look for in a quote
- What protection goes down before work starts
- What the guarantee covers, and for how long
- When it can be used again
- Whether cleaning and preparation are in the price
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes about two hours for a bath. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Make sure the area is dry
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
How to look after the repair
Aftercare is simple:
- Do not stand toiletries on the seal
- Use the extractor fan
- Keep the joints dry
- Give the seal a regular clean
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
About our accreditations · Every repair comes with a one-year guarantee.
