Cumbria · England
Bath & shower resealing (mastic) in Maryport, Cumbria
Bath, shower and sink resealing with new mould-resistant silicone in Maryport, carried out at your home and guaranteed for a year.
- Stained silicone
- Mould you can’t clean out
- Silicone smeared on tiles
Bath resealing in Maryport, done in place
A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. We are frequently asked to fix mould you can’t clean out and leaks at the edges, in shower trays & enclosures, kitchen worktops & sinks and wet rooms.
Every repair is covered by our one-year guarantee.
- Where
- Maryport (CA15)
- County
- Cumbria
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, for the same reason.
Common questions in Maryport
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Why does my sealant keep going mouldy?
Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Do you work in Maryport?
Yes. We cover the entire UK and travel to Maryport. Send us pictures for a fixed quote, or call 0345 017 0787.
Resealing in Maryport: why it matters
Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why us?
- CHAS and Constructionline accredited
- Everything repaired in place
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
Read our pricing.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Very wide gaps that need a trim
- Hidden water damage
- Loose tiles, which need refixing first
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
What we are called out for in Maryport
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Keep an eye out for these signs:
- An untidy old seal
- Black spots in the silicone
- Silicone coming away from the tiles
- Stained silicone
What to look for in a quote
- How long the guarantee is and what it covers
- How soon you can use it again
- Whether there are any call-out or travel charges
- What prep work is covered
Work for landlords and builders
If you manage property in Maryport, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Maryport and the surrounding area
Maryport is about 6 miles north-east of Workington, in Cumbria. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Maryport is one of 438 towns and villages in Cumbria we cover. Our jobs stretch from Maryport to Newcastle upon Tyne (76 miles away).
Every address in CA15 is covered. Streets in the area include High Street, Fleming Square and Main Street, and we cover them all. Maryport is on the A594 and A596, which makes it straightforward to reach. If you’re just outside Maryport, we cover Ewanrigg (1 mile south), Fothergill (1 mile south-west), Flimby (2 miles south-west), Dearham (2 miles east) and Broughton Moor (2 miles south-east). Further out, we also cover Workington (6 miles south-west), Whitehaven (12 miles south), Cockermouth (6 miles south-east), Moorclose (6 miles south), Wigton (15 miles north-east) and Cleator Moor (13 miles south). Being one of Cumbria’s larger places, Maryport sees plenty of our work.
Near you in Maryport
In Maryport, that means homes near Parish Church of St Mary, Netherton Infant School and Netherhall School. There is a railway station in Maryport itself: Maryport station. Nearby you’ll also find Senhouse Roman Museum (0.6 miles north) and Maryport Urban District (within half a mile south). Open spaces near Maryport include Siddick Pond.
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take around two hours, and you can get on with other things while we’re there.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
Looking after it afterwards
How the surface is treated afterwards matters:
- Open a window after bathing
- Ventilate the bathroom well
- Wipe the joints dry after use
- Clean the joints with a mild cleaner
Good ventilation is the best protection, and wipe the joints after use to keep mould away.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Also near Maryport
More services for Maryport
About our accreditations · Every repair comes with a one-year guarantee.
