Herefordshire · England

Bath & shower resealing (mastic) in Eaton, Herefordshire

Bath, shower and sink resealing with new mould-resistant silicone at your home in Eaton, with a one-year guarantee on every repair.

  • Water getting behind the bath or tray
  • Black mould in the sealant
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Eaton

How we handle bath resealing in Eaton

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why so many DIY reseals peel. We regularly repair baths, wet rooms and kitchen worktops & sinks, and common reasons people contact us are black mould in the sealant and silicone coming away from the tiles.

You get a one-year guarantee, the same in Eaton as everywhere else we work.

Area
Eaton (HR6)
Region
Herefordshire
Cover
12 months on all our work
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a couple of hours. Before we leave, we explain the curing time and the aftercare.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Clear the area around the damage

Get a quote

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.

Get a free quote

Advice

How to look after the repair

Nothing complicated is needed:

  • Keep the joints dry
  • Ventilate the bathroom well
  • Replace the seal when mould sets in
  • Clean the sealant gently and regularly

Avoid scraping the joints, and keep shampoo bottles off the joints.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

Eaton questions

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Why does my sealant keep splitting?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

How much does bath resealing cost in Eaton?

We give a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your HR6 postcode.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Will there be a smell?

There can be some smell while we work. It fades as everything cures.

Do you work in Eaton?

Yes, we do. We send a technician to Eaton for every job, with no extra charge for travel.

When we’d advise against a repair

In fairness, there are a few things a repair won’t fix:

  • Very wide gaps that need a trim
  • Water damage behind the bath that needs a builder
  • A flexing bath

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures

What we are called out for in Eaton

Even good sealant eventually discolours. Steam, soap and movement all wear it down.

It’s worth getting a quote if you see:

  • Mould you can’t clean out
  • Old sealant that looks dirty
  • Gaps in the seal
  • Water getting behind the bath or tray

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • Whether a trained technician does the job
  • How the colour is matched

Choosing a repair company

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Covering Eaton

Eaton is about 11 miles north of Hereford, in Herefordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 255 places across Herefordshire, from the larger towns to small villages. Our jobs stretch from Eaton to Birmingham (39 miles away).

We cover every part of the HR6 postcode area and the streets around it. We also cover the places around Eaton: Leominster (1 mile north-west), Stoke Prior (1 mile south-east), Newtown (2 miles west), The Broad (2 miles north-west) and Stockton (2 miles north). Larger places within reach include Hereford (11 miles south), Redhill (12 miles south), Newton Farm (12 miles south), Whitecross (11 miles south), Eign Hill (11 miles south) and Widemarsh (11 miles south).

Local landmarks in Eaton

Around Eaton, we work in homes near Priory Church, Earl Mortimer College and The White Lion Public House, among other places. For rail, the closest station is Leominster station, roughly 0.7 miles north-west. A little further out are Leominster (0.9 miles west) and Comfort Castle (1 mile north). Green spaces nearby include Dinmore Hill.

Map of Eaton © OpenStreetMap contributors

Why it’s worth resealing in Eaton

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. We charge the same wherever you are, so there is no premium for Eaton. The job itself decides the price: the material, the amount of damage and how many items.

Why Eaton customers choose us

  • Repair technicians who travel to you, UK-wide
  • A fixed quote before booking
  • Most jobs done in one visit
  • No need to remove anything

Take a look at our pricing.

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

If you manage property in Eaton, we’ll quote for several properties at once. Send pictures for each one and we will price them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.