Flintshire · England

Bath & shower resealing (mastic) in Eccleston, Flintshire

Local bath resealing for Eccleston: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Unsealed corners
  • Black spots in the silicone
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Eccleston

Bath resealing in Eccleston without replacing anything

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. Common call-outs are for black spots in the silicone and water getting behind the bath or tray, in wet rooms, baths and kitchen worktops & sinks.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Eccleston (CH4)
Area hub
Flintshire
Warranty
One year on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Point us to the nearest place to park
  • Mention any parking restrictions or tricky access
  • Let the surface dry out before the visit

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote.

Send pictures for a quote

Read more

Your questions about bath resealing in Eccleston

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Why does mould come back so fast?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Are there extra charges for Eccleston?

No. Our quotes include travel, with the same prices everywhere we work.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Can new silicone go over old?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, to open the joint fully.

Is resealing worth it?

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • A year’s guarantee on all work
  • Work done at your home or business
  • Nothing taken out or refitted
  • We’ll tell you if it’s not worth repairing

Read our prices page.

Keeping it looking good

So the finish stays in good condition for years:

  • Wipe the joints dry after use
  • Let steam out after showers
  • Store bottles on a shelf
  • Run the extractor fan during and after showers

Leave the sealant to cure for the time we give you, normally about a day.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

About Eccleston

Eccleston is about 3 miles south of Chester, in Flintshire. Whether you’re in the middle of Eccleston or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 139 towns and villages in Flintshire, from the larger towns to small villages. Our jobs stretch from Eccleston to Liverpool (17 miles away).

Our technicians cover all of the CH4 postcode area. Whether you live on Church Road, Paddock Road and Rake Lane or anywhere nearby, we can come to you. Other places close to Eccleston include Huntington (1 mile north-east), Handbridge (2 miles north), Queens Park (2 miles north), Bruera (2 miles south-east) and Saighton (2 miles east). We also work in nearby towns such as Connah's Quay (9 miles north-west), Buckley (9 miles west), Bwcle (8 miles west), Flint (12 miles north-west), Mold (11 miles west) and Coppa View (8 miles west).

Around Eccleston

Around Eccleston, we work in homes near Eccleston C-of-E Primary School, St Mary's Church and Westminster Park, among other places. Eccleston’s nearest station is Chester station, roughly 2.8 miles north of the centre. A little further out are Chester (1.9 miles north) and Chester Castle (2.1 miles north). Open spaces near Eccleston include Hockenhull Platts.

Map of Eccleston © OpenStreetMap contributors

What we can’t put right

We will always be straight with you, so here’s what a repair can’t fix:

  • Gaps so wide they need filling or trims before sealing
  • A flexing bath
  • Hollow or loose tiles

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures

What bath resealing costs

Each job gets its own fixed quote. These are the things that affect it:

  • The colour and finish to match
  • Previous DIY repairs that have to come out
  • The material
  • How many items we do on one visit

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

A couple of clear pictures is all it takes. It helps if you send:

  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage

To get a price, send a couple of photos through our quote form or call us. We will say straight away if a repair is the right fix.

When to call us in Eccleston

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.

It’s worth getting a quote if you see:

  • Leaks at the edges
  • Old sealant that looks dirty
  • An untidy old seal
  • Silicone coming away from the tiles

What to look for in a quote

  • How soon you can use it again
  • What the guarantee covers, and for how long
  • How your room will be protected
  • Aftercare advice

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.