Staffordshire · England

Bath Resealing in Fauld

Bath resealing for Fauld, without a refit. Get a fixed price from your pictures, then we come to you.

  • Mould you can’t clean out
  • An untidy old seal
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Fauld

Different materials, different repairs

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

About our bath resealing in Fauld

We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Whether it’s a messy previous reseal and silicone coming away from the tiles, we can help, on kitchen worktops & sinks, shower trays & enclosures and basins & vanity units alike.

Every repair is covered by our one-year guarantee, wherever you are in Staffordshire.

Roll-top bath being refinished by a Surface Doctor technician
Location
Fauld (DE13)
Region
Staffordshire
Guarantee
One year on every repair
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

How we price bath resealing

You will not pay by the hour. The price depends on:

  • How much damage there is
  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Most quotes are done from photos alone. To make it quick:

  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • One picture of the whole bath or shower

The quickest way to a price is to send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.

When a repair isn’t the answer

We will not take on work that will not last, so these are the limits:

  • Rotten walls or floors behind the bath
  • A bath or tray that moves, until its support is fixed
  • Gaps too big for silicone alone

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Baths

How it works

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take around two hours, and you can get on with other things while we’re there.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Tell us about parking, stairs or access
  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Send us photos of the damage and one of the whole item, with your DE13 postcode, and we will reply with a fixed price.

Get a fixed quote

Related advice

About Fauld

Fauld is about 5 miles north-west of Burton upon Trent, in Staffordshire. From the centre of Fauld to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 512 places across Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 28 miles away.

Here we cover the DE13 postcode area. Neighbouring places we cover include Scropton (1 mile north), Hanbury (1 mile south-west), Woodend (2 miles south-west), Blackbrook (2 miles south) and Foston (2 miles north). Further out, we also cover Burton upon Trent (5 miles south-east), Lichfield (13 miles south), Rugeley (12 miles south-west), Burntwood (15 miles south-west), Cheadle (14 miles north-west) and Uttoxeter (7 miles north-west).

Local landmarks in Fauld

Locally, our jobs take us to homes close to Church of St Paul, among other places. For rail, the closest station is Tutbury & Hatton station, roughly 1.6 miles east of the centre. Other landmarks nearby include Tutbury Museum (1.4 miles east) and Tutbury Castle (1.2 miles east).

Map of Fauld © OpenStreetMap contributors

What we’re called out for in Fauld

Most reseals are because of black mould. It grows into the sealant itself, so cleaning cannot get it all out.

These are the problems we are asked about most:

  • Silicone coming away from the tiles
  • Damp near the bath
  • A messy previous reseal
  • Gaps by the taps

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How soon you can use it again
  • How long the guarantee is and what it covers
  • How your room will be protected

Choosing a repair company

How to care for the repair

Most damage we see is avoidable. These habits help:

  • Wipe the joints dry after use
  • Store bottles on a shelf
  • Reseal at the first sign of lifting
  • Open a window after bathing

Avoid scraping the joints, and do not stand bottles on the seal.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.

Landlord and trade work in Fauld

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Questions from Fauld

Do you work for landlords and businesses?

Yes, often. We can quote for several properties together and work between tenancies.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Can you redo someone else’s repair?

Yes, we often do. It can add a little time, which we include in the quote.

Is the work guaranteed?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Do you seal over the old sealant?

Never over old. It’s removed, cleaned off and the joint dried first.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.