Norfolk · England

Bath & shower resealing (mastic) in Filby, Norfolk

Bath resealing in Filby without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Old sealant that looks dirty
  • An untidy old seal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Filby

Filby questions

Is there a call-out fee?

We don’t add a call-out fee. Your fixed price includes everything.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can new silicone go over old?

We always remove the old sealant completely. New silicone will not bond to old.

Do you cover the whole of Norfolk?

We cover the entire UK, including Filby and the rest of Norfolk. Send your postcode with your photos and we will confirm dates.

How long does silicone take to cure?

Normally about a day later. We’ll tell you the exact time.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

About our bath resealing in Filby

Baths are resealed with water in them, so the joint opens fully, so the seal does not tear when the bath is first used. If you are dealing with sealant that’s split or lifting and mould you can’t clean out, we can usually put it right, whatever the material.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Roll-top bath being refinished by a Surface Doctor technician
Location
Filby (NR29)
Region
Norfolk
Guarantee
One year on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Materials and what they mean for the repair

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Clean the sealant gently and regularly
  • Wipe the joints dry after use
  • Let steam out after showers
  • Don’t stand toiletries on the seal

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we’ll say if you need a builder or plumber.

Filby and the surrounding area

Filby is about 5 miles north-west of Great Yarmouth, in Norfolk. Jobs in Filby are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Filby is one of 797 towns and villages in Norfolk we cover.

Our repair technicians cover all of the NR29 postcode area and the streets around it. We regularly work on streets such as Main Road, Mulberry Tree Close and Pound Lane. Neighbouring places we cover include Mautby (1 mile south-east), Thrigby (1 mile south-west), Ormesby St Michael (1 mile north), Ormesby St Margaret (2 miles north-east) and Runham (2 miles south-west). Further out, we also cover Norwich (15 miles west), Great Yarmouth (5 miles south-east), Gorleston-on-Sea (7 miles south-east), Sprowston (14 miles west), Thorpe St Andrew (13 miles west) and Southtown (5 miles south-east).

Near you in Filby

We visit homes around Filby Primary School and Church of All Saints. The nearest railway station is Great Yarmouth station, roughly 4.3 miles south-east of the centre. Nearby you’ll also find Blitz and Pieces (2.8 miles north-east) and Caister Castle (2 miles south-east). Not far away are Filby Broad and Winterton Dunes.

Map of Filby © OpenStreetMap contributors

What we’re called out for in Filby

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

Typical reasons for a call-out include:

  • Black mould in the sealant
  • Silicone coming away from the tiles
  • Discoloured, yellow sealant
  • Leaks at the edges

Comparing quotes

  • Who turns up on the day
  • How the colour is matched
  • Aftercare advice
  • A fixed quote, and whether VAT is included

Our hiring checklist

What happens on the day

We agree an arrival time beforehand. On site, it takes around two hours. The room is left tidy and you will know when it can be used.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Before we arrive

  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Send pictures for a quote

Advice

Landlords, agents and businesses in Filby

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We work for landlords, letting agents and housing providers in Filby as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

When we would advise against a repair

It helps to know what we can’t do:

  • Gaps so wide they need filling or trims before sealing
  • Tiles that move, until they’re refixed
  • A bath or tray that moves, until its support is fixed

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What affects the price in Filby

Every quote is fixed and free. What we take into account:

  • The type of damage
  • How hard the colour is to match
  • Where the damage is and how we get to it
  • The size and number of damaged areas

Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

You can take the photos on your phone. Just ensure we can see:

  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • A photo taken from further back

Upload pictures of the damage and one of the whole item, with your NR29 postcode, and we’ll come back with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.