Surrey · England

Bath Resealing in Flexford

Bath resealing in Flexford without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • A messy previous reseal
  • Stained silicone
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Flexford

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, for the same reason.

Baths

Baths are resealed with water in them, to open the joint fully.

Bath resealing at your home in Flexford

Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. If you’re dealing with black spots in the silicone and silicone coming away from the tiles, we can generally put it right, on wet rooms, kitchen worktops & sinks and baths alike.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Where
Flexford (GU3)
Region
Surrey
Guarantee
A year, on every repair
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

FAQs for Flexford

How long does silicone take to cure?

Normally about a day later. We’ll tell you the exact time.

Which areas do you work in?

Everywhere in the UK, Flexford included. Travel is included in the price.

Why does the silicone keep cracking?

Movement is the usual cause. We seal baths full of water.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

How long does a reseal take?

Typically a couple of hours, plus curing time.

Resealing in Flexford: why it matters

Putting new silicone over old doesn’t last. It peels within weeks, and traps mould underneath. We remove the old sealant completely. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • Straight answers about what a repair can do
  • One price list for the whole UK

Take a look at our prices page.

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • A flexing bath
  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first

Send us pictures and we’ll tell you honestly before booking.

Surfaces we repair

  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures

What affects the price in Flexford

There is no charge for travel to Flexford. The price depends on:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • Unusual colours or finishes
  • Whether we combine several jobs

A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Any earlier repairs or coatings
  • One picture of the entire bath or shower
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

The process

There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to around two hours.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Getting ready for the visit

  • Open a window if you can
  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Advice

Flexford and the surrounding area

Flexford is about 4 miles east of Aldershot, in Surrey. Whether you are in the middle of Flexford or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 395 towns and villages in Surrey, from the larger towns to small villages. Our jobs stretch from Flexford to London (31 miles away).

Jobs in GU3 are booked in the same way as anywhere else. Whether you live on Christmaspie Avenue, Orchard Close and Cull's Road or anywhere nearby, a technician can come to you. We also travel to Christmas Pie (1 mile south), Wanborough (1 mile south-east), Normandy (1 mile north), Willey Green (1 mile north-east) and Wyke (1 mile north-west). Larger places within reach include Guildford (4 miles east), Woking (7 miles north-east), Camberley (7 miles north), Farnham (6 miles south-west), Egham (14 miles north-east) and Walton-on-Thames (15 miles north-east).

Landmarks near Flexford

Our clients here include homes close to Church of St Bartholomew, Ash Manor School and Wyke Primary School and the streets around them. Flexford has its own railway station: Wanborough station. Well-known places in the area include Seale and Tongham (2.8 miles south-west) and Ash Museum (2 miles west). For a walk, there is Ash Ranges and Hog's Back.

Map of Flexford © OpenStreetMap contributors

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Reseal when black spots will not clean off
  • Open a window after bathing
  • Give the seal a regular clean
  • Dry the seal after bathing

Keep the room well ventilated, and dry the joints after bathing so mould struggles to take hold.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Work for landlords and builders

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.

For anyone letting property in or around Flexford, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.