Norfolk · England

Bath & shower resealing (mastic) in Foulden, Norfolk

Bath resealing for Foulden, without a refit. Get a fixed price from your pictures, then we come to you.

  • Discoloured, yellow sealant
  • Gaps in the seal
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Foulden

Bath resealing at your home in Foulden

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We regularly repair shower trays & enclosures, basins & vanity units and baths, and common reasons people get in touch are a messy previous reseal and sealant that’s split or lifting.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Foulden (IP26)
Region
Norfolk
Cover
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Foulden questions

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Why does the silicone keep cracking?

Movement is the usual cause. We seal baths full of water.

How much does bath resealing cost in Foulden?

We give a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Is a repair better than a new one?

Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Can you reseal over the old silicone?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

Do the materials smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

How it works

Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes around two hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Make sure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Send us a photo of the damage and one of the entire item, and tell us you’re in Foulden, and we’ll come back with a fixed quote.

Get a free quote

Related advice

Do you need bath resealing in Foulden?

Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.

Keep an eye out for any of the following:

  • Damp near the bath
  • Mould you can’t clean out
  • Gaps in the seal
  • Discoloured, yellow sealant

What to look for in a quote

  • What the guarantee covers, and for how long
  • How your room will be protected
  • How changes to the job are handled
  • What preparation is included

Our hiring checklist

Repairs by material

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Honest limits

A repair isn’t right for every job, including:

  • Water damage behind the bath that needs a builder
  • Loose tiles, which need refixing first
  • Very wide gaps that need a trim

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms
  • Baths
  • Kitchen worktops & sinks

Why reseal now?

Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

Why Foulden customers choose us

  • Everything repaired in place
  • Normally one visit, start to finish
  • We leave the room as we found it
  • Straight answers about what a repair can do

Take a look at our full price list.

About Foulden

Foulden is about 12 miles north-west of Thetford, in Norfolk. Across the IP26 area, we come to you. Foulden is one of 797 places in Norfolk we cover. Our jobs stretch from Foulden to London (about 79 miles away).

Our visits in IP26 work the same way as everywhere else we cover. Whether you live on Vicarage Road, Walnut Close and School Road or anywhere nearby, a technician can come to you. Other places close to Foulden include Beckett End (1 mile south), Gooderstone (2 miles north), Cranwich (3 miles south), Hilborough (4 miles east) and Ickburgh (4 miles south-east). Within a short drive, we also cover Thetford (12 miles south-east), Downham Market (10 miles west), Watton (10 miles east), Swaffham (7 miles north-east), Fairstead (15 miles north-west) and South Lynn (15 miles north-west).

Local landmarks in Foulden

We visit homes around Church of All Saints. Further afield, we also cover the area around Desert Rats Museum (3.9 miles east).

Map of Foulden © OpenStreetMap contributors

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Clean the sealant gently and regularly
  • Use the extractor fan
  • Wipe the joints dry after use
  • Store bottles on a shelf

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

If you manage property in Foulden, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.