Northumberland · England

Bath & shower resealing (mastic) in Glanton, Northumberland

Bath, shower and sink resealing with new mould-resistant silicone in Glanton, carried out at your home and guaranteed for a year.

  • An untidy old seal
  • Sealant that is split or lifting
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Glanton

About Glanton

Glanton is about 20 miles north-west of Morpeth, in Northumberland. Our repair technicians come to homes and businesses in Glanton, so nothing has to leave your home. Glanton is one of 189 places in Northumberland where we work. We work right across the region, from Glanton to Newcastle upon Tyne (32 miles away).

We cover every part of the NE66 postcode area. We regularly work on streets such as Front Street and West Turnpike. Neighbouring places we cover include Powburn (1 mile north), Whittingham (2 miles south), Eglingham (4 miles north-east), Roddam (5 miles north-west) and Netherton (7 miles south-west). We also work in nearby towns such as Alnwick (7 miles east), Amble (14 miles south-east), Rothbury (8 miles south), Wooler (10 miles north-west), Seahouses (14 miles north-east) and Belford (12 miles north).

What’s near Glanton

In Glanton, that means homes near Roman Catholic Church of St Mary and Attached Presbytery and Queens Head pub, among other places. Well-known places in the area include Breamish Valley Archaeology Exhibition (3.5 miles west) and Edlingham Castle (4.4 miles south-east). Open spaces near Glanton include Titlington Pike and Kimmer Lough.

Map of Glanton © OpenStreetMap contributors

Bath resealing in Glanton without replacing anything

We reseal baths with them filled with water, so the joint opens fully, so the seal doesn’t tear when the bath is first used. If you are dealing with missing sealant behind the taps and stained silicone, we can usually put it right, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.

Technician in a mask working on a freestanding roll-top bath
Location
Glanton (NE66)
County
Northumberland
Cover
A year, on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What affects the price in Glanton

There is no area surcharge for Glanton. What changes the price is:

  • How many areas need work
  • The type of damage
  • The material
  • How many items we do on one visit

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

You can normally get a fixed quote without us visiting. To make it quick:

  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • Your postcode, so we can check dates
  • One picture of the entire bath or shower

For a price in Glanton, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Gaps so wide they need filling or trims before sealing
  • Tiles that move, until they’re refixed
  • Hidden water damage

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units

Questions from Glanton

Can new silicone go over old?

All the old sealant comes out. New silicone will not bond to old.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How long does resealing take?

Around two hours for a bath, then it needs to cure.

Can I add another job to the visit?

Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.

What areas do you cover?

We work UK-wide, so Glanton is covered. Our prices are the same everywhere.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Aftercare tips

Looking after the surface is easy, and it makes a real difference:

  • Reseal when black spots will not clean off
  • Open a window after bathing
  • Keep the joints dry
  • Store bottles on a shelf

Don’t scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Northumberland and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

Baths are resealed with water in them, to open the joint fully.

Signs you need bath resealing in Glanton

Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.

Send us a photo if you notice any of these:

  • An untidy old seal
  • Missing sealant behind the taps
  • Discoloured, yellow sealant
  • Black mould in the sealant

Before booking anyone

  • What preparation is included
  • Whether they match the colour on site
  • How long it needs to cure
  • What the guarantee covers, and for how long

Our hiring checklist

The process

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a couple of hours from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area
  • Have a window or extractor fan available

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.