Leicestershire · England

Bath Resealing in Goadby Marwood

Fixed-price bath resealing in Goadby Marwood and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Water getting behind the bath or tray
  • Silicone smeared on tiles
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Goadby Marwood

Our work in Goadby Marwood

Goadby Marwood is about 5 miles north-east of Melton Mowbray, in Leicestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 287 places across Leicestershire, from the larger towns to small villages. We work right across the region, from Goadby Marwood to Birmingham (51 miles away).

We work across LE14 and the streets around it. Streets in the area include Main Street and Towns Lane, and we cover them all. Nearby, we also work in Wycomb (1 mile south-west), Eastwell (1 mile north), Waltham on the Wolds (2 miles south-east), Scalford (2 miles south-west) and Eaton (2 miles north-east). Larger places within reach include Melton Mowbray (5 miles south-west), Syston (13 miles south-west), Sileby (13 miles south-west), East Leake (14 miles west), Mountsorrel (15 miles south-west) and Barrow upon Soar (14 miles west).

What’s near Goadby Marwood

Our clients here include homes close to Church of St Denys. Other landmarks nearby include Thorpe Arnold (4 miles south).

Map of Goadby Marwood © OpenStreetMap contributors

Bath resealing at your home in Goadby Marwood

The key to a good reseal is getting all of the old silicone out. New silicone won’t bond to old, which is why many DIY jobs peel. Our technicians work on kitchen worktops & sinks, wet rooms and shower trays & enclosures, and common reasons people get in touch are silicone smeared on tiles and black spots in the silicone.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Location
Goadby Marwood (LE14)
County
Leicestershire
Cover
A year, on every repair
Quote
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Questions from Goadby Marwood

What do you need from me?

Photos of the damage, a photo of the whole bath or shower and your postcode. Then we’ll agree a date.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.

What happens if you find more damage?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

What areas do you cover?

Across the UK. Prices do not change with location.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.

Why reseal now?

Putting new silicone over old does not last. It peels within weeks, and traps mould underneath. A proper reseal removes the old first. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • One visit for most repairs
  • Dust sheets down, tidy finish
  • Free fixed quotes from pictures
  • Everything repaired in place

Take a look at our full price list.

The process

You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It generally takes a couple of hours, and you can get on with other things while we’re there.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed quote, not an estimate.

Get a free quote

Advice

What affects the price in Goadby Marwood

You’ll know the full cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • How many items we do on one visit
  • How much damage there is

Our prices are the same across the UK, so there is no premium for Goadby Marwood. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

You can take the photos on your phone, there is no need for anything special. Make sure they show:

  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • Any details about the material
  • A wider photo showing the whole bath or shower

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Signs you need bath resealing in Goadby Marwood

Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.

Most people get in touch when they notice something like this:

  • Black mould in the sealant
  • Unsealed corners
  • Gaps in the seal
  • Old sealant that looks dirty

What to look for in a quote

  • What preparation is included
  • What the guarantee covers, and for how long
  • Is the price fixed, and does it include VAT?
  • What happens if the damage is worse than the pictures show

How to compare quotes

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Dry the seal after bathing
  • Air the room after use
  • Reseal at the first sign of lifting
  • Run the extractor fan during and after showers

Good ventilation is the best protection, and dry the joints after bathing.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Rotten walls or floors behind the bath
  • Tiles that move, until they’re refixed
  • A flexing bath

Send us photos and we will tell you honestly.

What we work on

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures
  • Wet rooms
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.