Leicestershire · England

Bath & shower resealing (mastic) in Waltham on the Wolds, Leicestershire

Local bath resealing for Waltham on the Wolds: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Silicone smeared on tiles
  • Sealant that’s split or lifting
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Waltham on the Wolds

About our bath resealing in Waltham on the Wolds

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Common call-outs are for leaks at the edges and discoloured, yellow sealant, across basins & vanity units, wet rooms and baths.

Rural addresses like Waltham on the Wolds just need a little planning, and we will organise the visit.

Whatever the size of the job, it’s backed by a one-year guarantee.

Area
Waltham on the Wolds (LE14)
Region
Leicestershire
Warranty
A year, on every repair
Quote
A fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Waltham on the Wolds: what to know about resealing

We also work for schools, leisure centres and businesses, so if you look after a building such as Waltham on the Wolds Church of England Primary School, changing rooms and washrooms can be repaired in place too.

Waltham on the Wolds is about 5 miles north-east of Melton Mowbray, in Leicestershire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 287 towns and villages in Leicestershire. You can also see our page for Birmingham, about 51 miles away.

All of LE14 is within our area for bath resealing. Bath resealing is available to homes on High Street, Mill Lane and Wharton Close and the roads around them. Neighbouring places we cover for bath resealing include Goadby Marwood (2 miles north-west), Wycomb (2 miles west), Scalford (3 miles west), Eaton (3 miles north) and Eastwell (3 miles north-west). Within a short drive, we also cover Melton Mowbray (5 miles south-west), Syston (14 miles south-west), Sileby (14 miles south-west), Mountsorrel (15 miles south-west), Barrow upon Soar (15 miles west) and Scraptoft (15 miles south-west).

Around Waltham on the Wolds

Our clients here include homes close to The Marquis Granby Public House and the streets around them. The closest station to Waltham on the Wolds is Melton Mowbray station, about 5 miles south-west of the centre. Well-known places in the area include Garthorpe Motte (3.1 miles south-east).

Map of Waltham on the Wolds © OpenStreetMap contributors

How we price bath resealing

There is no area surcharge for Waltham on the Wolds. The price reflects:

  • The material
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach
  • How many areas need work

A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Quotes from your pictures

You can take the photos on your phone. Ensure they show:

  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • A photo taken from further back

Most customers in Waltham on the Wolds get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Very wide gaps that need a trim
  • Loose tiles, which need refixing first
  • A bath or tray that moves, until its support is fixed

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Shower trays & enclosures
  • Baths
  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units

Common problems we fix in Waltham on the Wolds

Poor ventilation speeds things up: damp hangs around, and mould takes hold.

Most people contact us after spotting one of these:

  • Unsealed corners
  • Stained silicone
  • Water getting behind the bath or tray
  • A messy previous reseal

Rented homes near Melton Mowbray station (about 5 miles south-west) change hands often, and repairing baths and showers between tenants is quicker than replacing them.

What your quote should include

  • What the guarantee covers, and for how long
  • What happens if the damage is worse than the photos show
  • How soon you can use it again
  • Aftercare advice

10 questions to ask before booking

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Looking after it afterwards

How the surface is treated afterwards matters:

  • Let steam out after showers
  • Wipe the joints dry after use
  • Use the extractor fan
  • Keep bottles off the joints

Avoid scraping the joints, and do not stand bottles on the seal.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

What happens on the day

Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. Allow around two hours, and we will tell you if anything changes. Somewhere like Waltham on the Wolds needs a little journey planning: let us know about lanes, gates and parking. We bring everything needed for the bath resealing, so there is no second trip.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Point us to the nearest place to park
  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed price

Related advice

Why it’s worth resealing in Waltham on the Wolds

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. For a rural home like those around Waltham on the Wolds, a replacement means trades travelling out and waste being taken away, while bath resealing is one trip.

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why us?

  • Most jobs done in one visit
  • Technicians who travel to you, UK-wide
  • Rooms protected and left tidy
  • One price list for the whole UK

Read our Prices page.

Common questions in Waltham on the Wolds

Will you travel to Waltham on the Wolds?

Yes, we do: Waltham on the Wolds is covered like any town. Tell us if access is tricky.

Can you redo the sealant around baths and showers at a school or business in Waltham on the Wolds?

Yes, and we’re CHAS, Constructionline and SafeContractor accredited. Tell us about access and timings for the building.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What happens after I send pictures?

You will get a fixed quote back. There is no obligation to book.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Can you price it without visiting?

Normally, yes. Clear photos let us give you a fixed price without visiting.

What does bath resealing cost?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.

Will there be a smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.