Shetland Islands · Scotland
Bath Resealing in Hamister
Bath resealing for Hamister, without a refit. Get a fixed price from your pictures, then we come to you.
- Water getting behind the bath or tray
- A messy previous reseal
- Stained silicone
Bath resealing in Hamister without replacing anything
Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. Whether it’s old sealant that looks dirty and silicone coming away from the tiles, we can help.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Location
- Hamister (ZE2)
- Area hub
- Shetland Islands
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
How it works
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes around two hours, and you are welcome to carry on with your day while we work.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Before we arrive
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Get a quote
For a price in Hamister, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
What else we do in Hamister
FAQs for Hamister
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you quote from pictures?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
How much does bath resealing cost in Hamister?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Repairs by material
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
For landlords and businesses
Landlords, letting agents and housing providers in Hamister use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Prices and what affects them
Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- What the surface is made of
- Where the damage is and how we get to it
- The type of damage
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.
When to call us in Hamister
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
Get in touch if you’ve noticed any of these:
- A messy previous reseal
- Gaps in the seal
- Black spots in the silicone
- Leaks at the edges
Questions to ask before booking
- How to look after the finish
- Who turns up on the day
- A fixed quote, and whether VAT is included
- How long it needs to cure
Our work in Hamister
Hamister is in the Shetland Islands. Whether you’re in the middle of Hamister or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Hamister is one of 63 towns and villages in the Shetland Islands where we work.
Our repair technicians cover all of the ZE2 postcode area. Local streets include Norrendal and North Park, all of which we cover. We also cover the places around Hamister: Symbister (1 mile south), Tripwell (1 mile north-east), Sandwick (1 mile south), Clate (1 mile south) and Brough (1 mile north-east). Larger places within reach include Lerwick (15 miles south), Sound (15 miles south) and Brae (12 miles west). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Hamister
For a walk, there is Setter Hill and Little Water.
Is resealing worth it?
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- No need to remove anything
- One visit for most repairs
Take a look at our full price list.
Aftercare tips
To keep it looking its best:
- Dry the seal after bathing
- Use the extractor fan
- Reseal at the first sign of lifting
- Store bottles on a shelf
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
