Lincolnshire · England

Bath Resealing in High Ferry

Bath, shower and sink resealing with new mould-resistant silicone at your home in High Ferry, with a one-year guarantee on every repair.

  • Black mould in the sealant
  • Silicone coming away from the tiles
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near High Ferry

When to call us in High Ferry

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

Typical reasons for a call-out include:

  • An untidy old seal
  • Black spots in the silicone
  • Gaps in the seal
  • Water getting behind the bath or tray

What your quote should include

  • Who will actually do the work
  • Whether they match the colour on site
  • What aftercare is recommended
  • How your room will be protected

How to compare quotes

Bath resealing in High Ferry without replacing anything

Resealing is quick, but it transforms the look. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. If you’re dealing with gaps by the taps and gaps in the seal, we can help, on baths, wet rooms and kitchen worktops & sinks alike.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Technician in a mask working on a freestanding roll-top bath
Location
High Ferry (PE22)
Region
Lincolnshire
Warranty
A year, on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

FAQs for High Ferry

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we will take it from there.

Can you quote from photos?

Normally, yes. Clear pictures let us give you a fixed price without visiting.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Is there a call-out fee?

We do not add a call-out fee. The fixed quote covers the visit and the work.

How long does silicone take to cure?

Normally about a day later. We confirm before we leave.

How do I stop mould in sealant?

Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

Why does the silicone keep cracking?

Movement is the usual cause. We seal baths full of water.

Aftercare tips

To keep it looking its best for years:

  • Dry the seal after bathing
  • Keep bottles off the joints
  • Replace the seal when mould sets in
  • Let steam out after showers

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

When a repair is not the answer

We’ll always be straight with you, so here’s what a repair will not do:

  • Tiles that move, until they’re refixed
  • Gaps so wide they need filling or trims before sealing
  • Rotten walls or floors behind the bath

If in doubt, send photos and we’ll say what we think.

Materials we work on in High Ferry

  • Shower trays & enclosures
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths

How we price bath resealing

There’s no area surcharge for High Ferry. The price reflects:

  • Access to the area
  • Whether we combine several jobs
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

A repair is priced on what needs doing, not where you live. The full price is agreed before you book.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • One picture of the entire bath or shower

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

If you manage property in High Ferry, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

What we do, step by step

We agree an arrival time beforehand, so you know when to expect us. On site, it takes about two hours for a bath in most cases. The room is left tidy and ready to use once it has cured.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Ensure the area is dry
  • Ensure the room can be ventilated

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.

Send photos for a quote

Read more

Our work in High Ferry

High Ferry is about 4 miles north of Boston, in Lincolnshire. Whether you are in the middle of High Ferry or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. High Ferry is one of 732 towns and villages in Lincolnshire where we work.

Here we cover the PE22 postcode area. We also travel to Sibsey (1 mile north-east), Hilldyke (1 mile south), Sibsey Fen Side (1 mile north), Fishtoft Drove (2 miles west) and Cowbridge (2 miles south-west). We also work in nearby towns such as Boston (4 miles south), Horncastle (13 miles north), Woodhall Spa (13 miles north-west), Witham (4 miles south-west), Staniland (4 miles south-west) and Kirton (8 miles south).

What’s near High Ferry

Typical jobs here are in homes near Church of St Margaret and The Sibsey Free Primary School and the streets around them. For rail, the closest station is Boston station, roughly 3.9 miles south-west. Further afield, we also cover the area around Pilgrim Hospital (2.7 miles south).

Map of High Ferry © OpenStreetMap contributors

Resealing in High Ferry: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in High Ferry

  • Fixed prices from your pictures
  • Technicians who travel to you, UK-wide
  • One price list for the entire UK
  • We’ll tell you if it’s not worth repairing

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.