Lincolnshire · England
Bath re-enamelling & resurfacing in Hilldyke, Lincolnshire
Fixed-price bath re-enamelling in Hilldyke and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A roll-top that’s seen better days
When a repair isn’t the answer
It helps to know what we cannot do too:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
About our bath re-enamelling in Hilldyke
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with staining under the taps and around the waste and a period or roll-top bath worth keeping, we can generally put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Hilldyke (PE22)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Hilldyke: your questions answered
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
What happens after I send photos?
We come back with a fixed price. There is no obligation to book.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do you come to Hilldyke?
Yes. We work across the UK and travel to Hilldyke and the rest of Lincolnshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Landlords, agents and businesses in Hilldyke
For anyone letting property in or around Hilldyke, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
How it works
The work is clean and fairly quiet. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Hilldyke. What changes the price is:
- The material
- The colour and finish to match
- Access to the area
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Any details about the material
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Places near Hilldyke
Also in Hilldyke
Hilldyke and the surrounding area
Hilldyke is about 3 miles north-east of Boston, in Lincolnshire. Customers in Hilldyke get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Hilldyke is one of 732 towns and villages in Lincolnshire where we work.
Every address in PE22 is covered, from the main roads to the quietest streets. That includes homes on Boston Road, Hurn Road and Sibsey Road and the roads around them. Neighbouring places we cover include Cowbridge (1 mile south-west), High Ferry (1 mile north), Fishtoft Drove (1 mile north-west), Sibsey (2 miles north) and Frithville (3 miles north-west). Further out, we also cover Boston (3 miles south-west), Holbeach (14 miles south), Horncastle (14 miles north), Woodhall Spa (13 miles north-west), Pinchbeck (15 miles south-west) and Witham (3 miles south-west).
Landmarks near Hilldyke
Locally, our jobs take us to homes close to Boston High School, among other places. Hilldyke’s nearest station is Boston station, about 2.8 miles south-west of the centre. A little further out are Pilgrim Hospital (1.6 miles south). Green spaces nearby include Freiston Shore RSPB reserve.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Prices start from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- Colour mixed on the day to match
- One-year guarantee on every repair
- We come to you, anywhere in the UK
Take a look at our full price list or bath cost comparison.
Do you need bath re-enamelling in Hilldyke?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Look out for any of the following:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
Comparing quotes
- Aftercare advice
- Whether the price is fixed and includes VAT
- Who turns up on the day
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
