Derbyshire · England
Bath & shower resealing (mastic) in Hilton, Derbyshire
Bath resealing across Hilton and nearby, done in a single visit in most cases and guaranteed for a year.
- Missing sealant behind the taps
- Leaks at the edges
- Sealant that is split or lifting

Landlords, agents and businesses in Hilton
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
How we handle bath resealing in Hilton
Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, then it needs to cure. We regularly repair basins & vanity units, kitchen worktops & sinks and shower trays & enclosures, and common reasons people contact us are missing sealant behind the taps and an untidy old seal.
Every repair is covered by our one-year guarantee.

- Location
- Hilton (DE65)
- Area hub
- Derbyshire
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Hilton
What else we do in Hilton
About Hilton
Hilton is about 4 miles north of Burton upon Trent, in Derbyshire. From the centre of Hilton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 532 towns and villages across Derbyshire. Our jobs stretch from Hilton to Birmingham (about 30 miles away).
All of DE65 is within our area. Whether you live on Main Street, Marston Brook and Calder Close or a nearby road, we can come to you. Other places close to Hilton include Burntheath (1 mile north), Marston on Dove (1 mile west), Egginton (2 miles south-east), Rolleston on Dove (2 miles south-west) and Hatton Fields (2 miles north-west). Further out, we also cover Swadlincote (7 miles south-east), Ilkeston (15 miles north-east), Long Eaton (15 miles east), Belper (13 miles north-east), Heanor (15 miles north-east) and Ripley (15 miles north-east).
Landmarks near Hilton
Locally, our jobs take us to homes close to St Mary's Church, The de Ferrers Academy and Hilton Primary School, among other places. For rail, the closest station is Tutbury & Hatton station, roughly 2.2 miles west of the centre. A little further out are Etwall Hospital (1.6 miles north-east) and Tutbury Museum (2.5 miles west).
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What affects the price in Hilton
We do not charge extra for travel to Hilton. The price depends on:
- Previous DIY repairs that have to come out
- The material
- The colour and finish to match
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
How to get a fixed price
Two or three clear photos are typically enough. Try to include:
- Details of any past repairs
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price without visiting.
When a repair is not the answer
A repair is not right for every job, including:
- Tiles that move, until they’re refixed
- A flexing bath
- Rotten walls or floors behind the bath
Send us pictures and we will tell you honestly before you book.
Materials we work on in Hilton
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
What we’re called out for in Hilton
In time, even good sealant discolours. Steam, soap and movement all take their toll.
The most common problems we’re called about are:
- Gaps in the seal
- Discoloured, yellow sealant
- Water getting behind the bath or tray
- An untidy old seal
Questions to ask before booking
- How the colour is matched
- Whether the price covers travel
- A fixed quote, and whether VAT is included
- Who will actually do the work
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Looking after it afterwards
It’s all simple stuff:
- Reseal when black spots will not clean off
- Give the seal a regular clean
- Store bottles on a shelf
- Air the room after use
Leave the sealant to cure for the time we give you, normally about a day.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Your questions about bath resealing in Hilton
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Do you cover the whole of Derbyshire?
Everywhere in the UK, Hilton included. Travel is included in the price.
What does bath resealing cost?
Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a couple of hours, tidy-up included.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Ensure the area is dry
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.

