Derbyshire · England
Bath Resealing in Burntheath
Bath, shower and sink resealing with new mould-resistant silicone at your home in Burntheath, with a one-year guarantee on every repair.
- Mould you can’t clean out
- An untidy old seal
- Stained silicone
Bath resealing at your home in Burntheath
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. Typical jobs include a messy previous reseal and damp near the bath, in baths, basins & vanity units and kitchen worktops & sinks.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Burntheath (DE65)
- County
- Derbyshire
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath resealing
Quotes are free and the price is fixed. What we look at:
- Access to the area
- How many items we do on one visit
- How many areas need work
- The colour and finish to match
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To help us price it:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Common questions in Burntheath
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
When can I use the bath after resealing?
Normally about a day later. We confirm before we leave.
How long will it take?
Around two hours for a bath, then it needs to cure.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you cover Burntheath?
Yes. We work across the UK and come to Burntheath. Send photos and we will quote, or call 0345 017 0787.
Why does my sealant keep splitting?
Normally because the bath or tray moves. We fill the bath before sealing it.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
How it works
Arrival times are agreed in advance. On site, it takes about two hours for a bath. The room is left tidy and you’ll know when it can be used.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Open a window if you can
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Let steam out after showers
- Clean the sealant gently and regularly
- Keep the joints dry
- Ventilate the bathroom well
Let it cure fully before using the bath or shower, normally about a day.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Repairs by material
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Where we work around Burntheath
Burntheath is about 5 miles north of Burton upon Trent, in Derbyshire. Our repair technicians come to clients in Burntheath, so you don’t need to take anything anywhere. Our technicians cover 532 places across Derbyshire, from the larger towns to small villages. We work right across the region, from Burntheath to Birmingham (30 miles away).
Jobs in DE65 work the same way as everywhere else we cover. We also travel to Hilton (1 mile south), Marston on Dove (1 mile south-west), Hatton Fields (1 mile west), Hatton (2 miles south-west) and Egginton (2 miles south-east). Within a short drive, we also cover Swadlincote (8 miles south-east), Ilkeston (15 miles north-east), Long Eaton (15 miles east), Belper (12 miles north-east), Heanor (15 miles north-east) and Ripley (15 miles north-east).
Local landmarks in Burntheath
Our customers here include homes close to Hilton Primary School and John Port Spencer Academy and the streets around them. Burntheath’s nearest station is Tutbury & Hatton station, about 2.2 miles south-west. Nearby you’ll also find Tutbury Museum (2.7 miles south-west) and Tutbury Castle (2.7 miles south-west).
Honest limits
A few problems are outside what a surface repair can do:
- Gaps so wide they need filling or trims before sealing
- Tiles that move, until they’re refixed
- Hidden water damage
Send us photos and we will tell you honestly before you book.
What we work on
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
Places near Burntheath
Other services in Burntheath
When to call us in Burntheath
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning can’t get it all out.
Get in touch if you’ve noticed any of these:
- Leaks at the edges
- Gaps by the taps
- Discoloured, yellow sealant
- Black spots in the silicone
Before booking anyone
- How to look after the finish
- Whether there are any call-out or travel charges
- Who will actually do the work
- How long it needs to cure
Is resealing worth it?
Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Rooms protected and left tidy
- A fixed quote before booking
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
Read our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
