Lancashire · England

Bath & shower resealing (mastic) in Holme, Lancashire

Bath resealing for Holme, without a refit. Get a fixed price from your photos, then we come to you.

  • An untidy old seal
  • Water getting behind the bath or tray
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Holme

Bath resealing at your home in Holme

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Our repair technicians work on shower trays & enclosures, baths and kitchen worktops & sinks, and common reasons people contact us are silicone coming away from the tiles and gaps by the taps.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Holme (LA6)
County
Lancashire
Warranty
One year on every repair
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Prices and what affects them

We charge the same across the UK, including Holme. The price reflects:

  • Whether we combine several jobs
  • How many areas need work
  • Access to the area
  • The material and finish

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • One picture of the entire bath or shower
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Something in shot to show the size

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, include your postcode and send them over. You will get a fixed quote, not an estimate.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

When we would advise against a repair

In fairness, some problems need a different fix:

  • Loose tiles, which need refixing first
  • A bath or tray that moves, until its support is fixed
  • Very wide gaps that need a trim

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Work for landlords and builders

If you manage property in Holme, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

About Holme

Holme is about 8 miles south of Kendal, in Lancashire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We work in 482 places across Lancashire, from the larger towns to small villages. Our nearest city page is Manchester, about 54 miles away.

Here we cover the LA6 postcode area. Whether you live on Station Road, Hillside and Trinity Drive or a nearby road, a technician can come to you. We also cover the places around Holme: Hale (1 mile west), Beetham (2 miles west), Ackenthwaite (2 miles north-west), Slack Head (2 miles west) and Milnthorpe (2 miles north-west). Further out, we also cover Lancaster (11 miles south), Morecambe (11 miles south-west), Heysham (13 miles south-west), Westfield War Memorial Village (11 miles south), Sandylands (12 miles south-west) and Carnforth (6 miles south).

Around Holme

In Holme, that means homes near Holme Primary School, Smithy Inn and Dallam School, among other places. For rail, the closest station is Silverdale station, about 3.9 miles south-west of the centre. Further afield, we also cover the area around Mourholme (4.1 miles south). For a walk, there is Hawes Water and Clawthorpe Fell.

Map of Holme © OpenStreetMap contributors

Holme: your questions answered

How much does bath resealing cost in Holme?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

Is there a call-out fee?

We do not add a call-out fee. Your fixed quote includes everything.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Why does my sealant keep splitting?

Something is moving. If it keeps happening, the support may need fixing.

Can you redo someone else’s repair?

Typically, yes. The old repair comes out first, so mention it when you send pictures.

Resealing in Holme: why it matters

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why Holme clients choose us

  • One visit for most repairs
  • Everything repaired in place
  • A fixed quote before booking
  • One-year guarantee on every repair

Read our prices page.

What happens on the day

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take around two hours, and we’ll tell you if anything changes.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Send pictures for a quote

Related advice

What we’re called out for in Holme

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

The things customers normally mention when they call include:

  • Black spots in the silicone
  • Silicone smeared on tiles
  • Water getting behind the bath or tray
  • Gaps in the seal

Questions to ask before you book

  • What happens if the damage is worse than the photos show
  • Whether the colour is mixed to match
  • How long the guarantee is and what it covers
  • How the room is protected while they work

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.