Norfolk · England
Bath Resealing in Homersfield
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Homersfield and across Norfolk. Send photos for a free, fixed quote.
- Gaps by the taps
- Black mould in the sealant
- Silicone coming away from the tiles
Homersfield and the surrounding area
Homersfield is about 15 miles south-east of Wymondham, in Norfolk. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Homersfield is one of 797 towns and villages in Norfolk where we work.
We work across the IP20 postcode area and the streets around it. Neighbouring places we cover include Wortwell (1 mile south-west), Low Street (1 mile south-west), St Cross South Elmham (1 mile south-east), Alburgh (1 mile north-west) and Redenhall (1 mile south-west). Larger places within reach include Norwich (15 miles north), Wymondham (15 miles north-west), Thorpe St Andrew (15 miles north), Norwich Lanes (15 miles north), Hethersett (15 miles north-west) and Heigham (15 miles north).
Landmarks near Homersfield
Our clients here include homes close to Church of St Mary and The Black Swan pub and the streets around them. A little further out are Harleston Museum (2.8 miles south-west) and Hawkers Hall (2.2 miles west). For a walk, there is Homersfield Lake and Winks Meadow.
About our bath resealing in Homersfield
We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We are often asked to fix discoloured, yellow sealant and water getting behind the bath or tray, across wet rooms, shower trays & enclosures and baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Homersfield (IP20)
- Area hub
- Norfolk
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath resealing in Homersfield
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
What happens next?
We come back with a fixed price. You’re under no obligation.
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Keeping it looking good
Nothing complicated is needed:
- Reseal when black spots will not clean off
- Let steam out after showers
- Use the extractor fan
- Don’t stand toiletries on the seal
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
What a repair cannot fix
A repair is not right for every job, including:
- Movement in the bath or tray
- Gaps so wide they need filling or trims before sealing
- Hidden water damage
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
- Kitchen worktops & sinks
For landlords and businesses
We work for landlords, letting agents and housing providers in Homersfield as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
When to call us in Homersfield
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
Signs it’s time to call us include:
- Black spots in the silicone
- Missing sealant behind the taps
- Old sealant that looks dirty
- Sealant that is split or lifting
What to look for in a quote
- When it can be used again
- What aftercare is recommended
- Who turns up on the day
- How changes to the job are handled
How we price bath resealing
Every quote is fixed and free. What we look at:
- Doing more than one item at once
- How easy the damage is to reach
- How hard the colour is to match
- The material and finish
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- One sharp close-up of the damage
- The material, if you know it
- Natural light rather than flash
- Something in shot to show the size
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
What we do, step by step
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take around two hours, and we leave the room as we found it.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- We make sure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Before we arrive
- Clear the area around the damage
- Let us know which floor the room is on
- Open a window if you can
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Places near Homersfield
More services for Homersfield
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
