Hampshire · England
Bath Resealing for Horseport homes
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Horseport. Send photos for a free, fixed quote.
- Discoloured, yellow sealant
- Silicone coming away from the tiles
- An untidy old seal
Landlord and trade work in Horseport
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
How we handle bath resealing in Horseport
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We are frequently asked to fix an untidy old seal and damp near the bath, in shower trays & enclosures, baths and basins & vanity units.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Horseport (SP6)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
We will not take on work that will not last, so here’s what a repair can’t put right:
- Gaps so wide they need filling or trims before sealing
- A flexing bath
- Rotten walls or floors behind the bath
If in doubt, send pictures and we will say what we think.
What we work on
- Basins & vanity units
- Baths
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
Signs you need bath resealing in Horseport
Joints split if the bath or tray moves, often because it was sealed with the bath empty.
Send us a picture if you notice any of these:
- Water getting behind the bath or tray
- Silicone coming away from the tiles
- Missing sealant behind the taps
- Mould you cannot clean out
Comparing quotes
- What protection goes down before work starts
- How to care for the finish
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
How it works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take a couple of hours, and we will tell you if anything changes.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We make sure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Clear the area around the damage
How to get a price
If you’re in Horseport and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Looking after it afterwards
So the finish stays in good condition:
- Keep the joints dry
- Give the seal a regular clean
- Replace the seal when mould sets in
- Run the extractor fan during and after showers
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
More services for Horseport
How we price bath resealing
We do not charge extra for travel to Horseport. The price depends on:
- Where the damage is and how we get to it
- The colour and finish to match
- What kind of damage it is
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- The postcode, so we can plan the visit
- The material, if you know it
- Something in shot to show the size
- One picture of the whole bath or shower
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Is resealing worth it?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- A year’s guarantee on all work
- Most jobs done in one visit
- Fixed prices from your photos
- CHAS and Constructionline accredited
See our full price list.
Common questions in Horseport
Do you cover the entire of Hampshire?
Across the UK, so Horseport is covered. Prices don’t change with location.
What information do you need?
Photos of the damage, a photo of the whole bath or shower and your postcode. Then we will agree a date.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
My seal keeps tearing. Why?
Something is moving. If it keeps happening, the support may need fixing.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How much does bath resealing cost in Horseport?
Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Horseport and the surrounding area
Horseport is about 5 miles north-east of Verwood, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 683 towns and villages in Hampshire, from the larger towns to small villages.
Our technicians cover all of the SP6 postcode area. Streets in the area include Bridge Street, Southampton Road and Ringwood Road. We also travel to Fordingbridge (1 mile north-west), Criddlestyle (1 mile east), Stuckton (1 mile south-east), Lower Burgate (1 mile north) and Tinkers Cross (1 mile north-west). We also work in nearby towns such as Totton (12 miles east), Romsey (14 miles east), New Milton (13 miles south-east), Ringwood (6 miles south), Barton on Sea (14 miles south-east) and Marchwood (15 miles east).
Around Horseport
Locally, our jobs take us to homes close to Fordingbridge Infant School, The George Inn and St Mary's Church, among other places. Further afield, we also cover the area around Fordingbridge Doll Museum (less than half a mile west) and Godshill Castle Hill (1.6 miles north-east). Green spaces nearby include Blashford Lakes and Linbrook Lake.
About our accreditations · Every repair comes with a one-year guarantee.
