Kent · England

Bath Resealing in Iwade

Our technicians come to Iwade for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Old sealant that looks dirty
  • Sealant that’s split or lifting
  • Unsealed corners
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Iwade?

What bath resealing costs

There is no charge for travel to Iwade. The price depends on:

  • The colour and finish to match
  • How much damage there is
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach

Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

Phone pictures are fine. Ensure they show:

  • One picture of the whole bath or shower
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.

About our bath resealing in Iwade

Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Common call-outs are for discoloured, yellow sealant and mould you can’t clean out, on shower trays & enclosures, wet rooms and kitchen worktops & sinks.

Every job is backed for twelve months. We return to put right any problem with the work.

Where
Iwade (ME9)
Area hub
Kent
Guarantee
A year, on every repair
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Is resealing worth it?

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.

What you get with us

  • Every repair guaranteed for a year
  • Everything repaired in place
  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited

See our prices page.

Covering Iwade

Iwade is about 2 miles north of Sittingbourne, in Kent. Across the ME9 area, we come to you. We cover all 922 towns and villages across Kent, from the larger towns to small villages. We work right across the region, from Iwade to London (about 36 miles away).

We work across ME9. Local streets include The Street, Sheerstone and Sheppey Way, all of which we cover. If you are just outside Iwade, we cover Howt Green (1 mile south), Kemsley (1 mile south-east), Milton Regis (2 miles south-east), Sittingbourne (2 miles south) and Murston (3 miles south-east). Within a short drive, we also cover Maidstone (11 miles south-west), Whitstable (13 miles east), Faversham (8 miles south-east), Minster (4 miles north-east), Davington (8 miles south-east) and Foley Park (11 miles south-west).

Landmarks near Iwade

Around Iwade, we work in homes near Milton Creek Country Park, Iwade School and Church of All Saints. Also close by are The Woolpack pub (under half a mile north) and Westlands School (2.4 miles south). The closest station to Iwade is Kemsley station, about 1 mile south. A little further out are Court Hall Museum (1.8 miles south) and Castle Rough (1.5 miles south-east).

  • Local facilities include Sittingbourne and Milton Urban District (1.8 miles south)
Map of Iwade © OpenStreetMap contributors

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Honest limits

In fairness, some problems need a different fix:

  • Rotten walls or floors behind the bath
  • A bath or tray that moves, until its support is fixed
  • Loose tiles, which need refixing first

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures

FAQs for Iwade

Do you cover Iwade?

Yes. We work across the UK and come to Iwade and the rest of Kent. Send photos and we’ll quote, or call 0345 017 0787.

Can you quote from photos?

Usually, yes. Clear pictures let us give you a fixed quote without visiting.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Why does my sealant keep splitting?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

Is the work guaranteed?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.

Do you need bath resealing in Iwade?

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning can’t get it all out.

Clients generally contact us about:

  • Damp near the bath
  • A messy previous reseal
  • Gaps in the seal
  • Old sealant that looks dirty

What to look for in a quote

  • How the colour is matched
  • How to care for the finish
  • If travel is included in the price
  • The length of the guarantee and what it covers

How to compare quotes

How it works

There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to around two hours.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Getting ready for the visit

  • Let us know about parking or access
  • Keep children and pets away from the room on the day
  • Clear toiletries, mats and anything else from around the area

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Related advice

Materials and what they mean for the repair

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, to open the joint fully.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.