Lincolnshire · England

Bath & shower resealing (mastic) in Kirton, Lincolnshire

Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Kirton. Send photos for a free, fixed quote.

  • Sealant that’s split or lifting
  • Silicone smeared on tiles
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Kirton homes

Bath resealing in Kirton without replacing anything

A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they keep water out. Our repair technicians work on wet rooms, shower trays & enclosures and kitchen worktops & sinks, and people most often call us about sealant that’s split or lifting and silicone smeared on tiles.

Big or small, it’s backed by a one-year guarantee in Kirton and across Lincolnshire.

Area
Kirton (PE20)
Area hub
Lincolnshire
Warranty
One year on every repair
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Prices and what affects them

We price every job individually, from your photos. What matters most is:

  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • Access to the area

Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

Good photos mean an accurate price. Here’s what helps:

  • A close-up of the damage, in focus
  • Something in shot to show the size
  • What it’s made of, if you know
  • A picture taken from further back

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Do you need bath resealing in Kirton?

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould grows faster.

Typical reasons for a call-out include:

  • Discoloured, yellow sealant
  • Water getting behind the bath or tray
  • Black mould in the sealant
  • Silicone coming away from the tiles

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • A fixed price, and whether VAT is included
  • Whether the price covers travel
  • What protection goes down before work starts

Our hiring checklist

Materials and what they mean for the repair

Shower trays

Trays are sealed with weight on them, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Common questions in Kirton

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Why does my sealant keep splitting?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

Can you reseal over the old silicone?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lincolnshire.

Do you come to Kirton?

Yes. We cover the entire UK and come to Kirton. Send photos and we will quote, or call 0345 017 0787.

How long does a reseal take?

Most reseals take about two hours. Leave it to cure before use.

What happens after I send photos?

You’ll get a fixed quote back. You’re under no obligation.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Covering Kirton

Kirton is about 3 miles south of Boston, in Lincolnshire. Across the PE20 area, we come to you. Kirton is one of 732 towns and villages in Lincolnshire we cover.

All of PE20 is covered, from the main roads to the quietest streets. Whether you live on High Street, Station Road and The Square or a nearby road, we can come to you. Nearby, we also work in Frampton (1 mile north-east), Frampton West End (1 mile north), Kirton End (1 mile north-west), Seadyke (2 miles south-east) and Wyberton (2 miles north-east). Further out, we also cover Boston (3 miles north), Spalding (11 miles south-west), Holbeach (9 miles south), Pinchbeck (9 miles south-west), Witham (4 miles north) and Long Sutton (12 miles south-east).

Around Kirton

Around Kirton, we work in homes near Church of St Peter and St Paul, The Old King's Head pub and Kirton Primary School. The closest station to Kirton is Boston station, about 3.6 miles north of the centre. A little further out are Pilgrim Hospital (4.8 miles north-east) and Frampton Castle (1.3 miles east). Open spaces near Kirton include RSPB Frampton Marsh.

Map of Kirton © OpenStreetMap contributors

Why reseal now?

Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. A proper reseal removes the old first. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why Kirton clients choose us

  • Nothing taken out or refitted
  • A fixed quote before booking
  • Dust sheets down, tidy finish
  • CHAS, Constructionline and SafeContractor accredited

See our pricing.

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Reseal at the first sign of lifting
  • Keep bottles off the joints
  • Dry the seal after bathing
  • Ventilate the bathroom well

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Black mould in sealant is not just unsightly. An early reseal keeps water where it belongs.

How it works

You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It typically takes a couple of hours, and you can get on with other things while we are there.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Open a window if you can
  • Let us know if it has been repaired before

Get a quote

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send pictures for a quote

Read more

What a repair can’t fix

A repair isn’t always the answer, and we would rather say so up front. We can’t fix:

  • Hidden water damage
  • A flexing bath
  • Hollow or loose tiles

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Baths
  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.