Warwickshire · England

Bath & shower resealing (mastic) in Knightcote, Warwickshire

Bath resealing for Knightcote, without a refit. Get a fixed price from your pictures, then we come to you.

  • Stained silicone
  • Black spots in the silicone
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Knightcote homes

About Knightcote

Knightcote is about 9 miles south-east of Royal Leamington Spa, in Warwickshire. We travel to clients in Knightcote and nearby villages, so nothing has to leave your home. Knightcote is one of 324 places in Warwickshire where we work. You can also see our page for Birmingham, about 28 miles away.

Postcode districts we cover here: CV47. Other places close to Knightcote include Northend (1 mile south), Temple Herdewyke (2 miles south-west), Gaydon (2 miles west), Avon Dassett (3 miles south) and Chadshunt (3 miles west). Larger places within reach include Rugby (14 miles north-east), Warwick (9 miles north-west), Royal Leamington Spa (9 miles north-west), Stratford-upon-Avon (13 miles west), Leamington Spa (9 miles north-west) and Kenilworth (13 miles north-west).

What’s near Knightcote

A little further out are British Motor Museum (2.7 miles west) and King John's Castle (4.8 miles south-west). Not far away are Harbury Spoilbank.

Map of Knightcote © OpenStreetMap contributors

Bath resealing at your home in Knightcote

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Whether it’s sealant that’s split or lifting and mould you can’t clean out, we can typically put it right.

Every repair comes with our one-year guarantee.

Where
Knightcote (CV47)
Area hub
Warwickshire
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Prices and what affects them

We charge the same across the UK, including Knightcote. What changes the price is:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • The type of damage

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your photos

You can typically get a fixed quote without us visiting. To help us price it:

  • Any details about the material
  • Daylight if possible, and no flash reflection
  • A wider photo showing the whole bath or shower
  • One sharp close-up of the damage

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Do you need bath resealing in Knightcote?

Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.

Send us a picture if you notice any of these:

  • An untidy old seal
  • Stained silicone
  • Silicone coming away from the tiles
  • Water getting behind the bath or tray

What your quote should include

  • What happens if they find more damage
  • Whether the price covers travel
  • How soon you can use it again
  • Whether the colour is mixed to match

Our hiring checklist

Why reseal now?

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.

Why book with us

  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited
  • Most jobs done in one visit
  • We leave the room as we found it

See our pricing.

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair cannot fix:

  • Movement in the bath or tray
  • Hidden water damage
  • Hollow or loose tiles

Not sure? Send photos and we will give you a straight answer before you book.

Materials we work on in Knightcote

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Your questions about bath resealing in Knightcote

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

How long before I can shower?

Normally after around 24 hours. We’ll tell you the exact time.

How long does resealing take?

Generally a couple of hours, then it needs to cure.

What areas do you cover?

The whole UK, including all of Warwickshire. Send your postcode with your photos and we’ll offer you dates.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Use the extractor fan
  • Clean the sealant gently and regularly
  • Air the room after use
  • Store bottles on a shelf

Good ventilation is the best protection, and wipe the joints after use.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.

Work for landlords and builders

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

How it works

We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes around two hours, and we leave the room as we found it.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Before we arrive

  • Tell us about parking, stairs or access
  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area

Getting a price

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.