Wiltshire · England
Bath & shower resealing (mastic) in Marston, Wiltshire
Bath resealing across Marston and nearby, usually in one visit.
- Mould you can’t clean out
- Silicone coming away from the tiles
- Water getting behind the bath or tray
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Bath resealing in Marston without replacing anything
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. Common call-outs are for missing sealant behind the taps and silicone coming away from the tiles, in basins & vanity units, kitchen worktops & sinks and shower trays & enclosures.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Marston (SN10)
- County
- Wiltshire
- Guarantee
- One year on every repair
- Quotes
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Marston
We price every job individually, from your pictures. What matters most is:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Getting a price from pictures
Phone pictures are fine. Ensure they show:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath or shower
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Rotten walls or floors behind the bath
- Hollow or loose tiles
- A bath or tray that moves, until its support is fixed
Send us pictures and we’ll tell you honestly.
Materials we repair
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
Also near Marston
Other services in Marston
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Common questions in Marston
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
How long does silicone take to cure?
Normally about a day later. We’ll tell you the exact time.
My seal keeps tearing. Why?
Typically because the bath or tray moves. We seal baths full of water.
Covering Marston
Marston is about 4 miles south-west of Devizes, in Wiltshire. Anywhere in SN10, we come to you. Marston is one of 425 places in Wiltshire we cover. We work right across the region, from Marston to Birmingham (80 miles away).
Here we cover the SN10 postcode area. Local streets include Close Lane, Norney Road and Plough Lane. We also travel to Worton (1 mile north-east), Townsend (1 mile north), Bulkington (2 miles north-west), Potterne Wick (2 miles east) and Poulshot (2 miles north). Larger places within reach include Trowbridge (7 miles west), Chippenham (11 miles north), Calne (9 miles north), Devizes (4 miles north-east), Westbury (7 miles south-west) and Melksham (6 miles north-west).
What’s near Marston
Around Marston, we work in homes near Christ Church, Erlestoke Park and The Plough pub. A little further out are Devizes Castle (3.5 miles north-east) and Devizes Community Hospital (3.9 miles north-east). The countryside around Marston includes West Lavington Down.
How to care for the repair
Simple care helps the repair last. Our advice:
- Give the seal a regular clean
- Open a window after bathing
- Reseal at the first sign of lifting
- Keep bottles off the joints
Avoid scraping the joints, and do not stand bottles on the seal.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Why reseal now?
Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. A proper reseal removes the old first. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- CHAS and Constructionline accredited
- Most jobs done in one visit
- Same prices wherever you are
- We come to you, anywhere in the UK
Read our pricing.
When to call us in Marston
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.
Send us a photo if you notice any of these:
- Gaps by the taps
- Leaks at the edges
- Silicone smeared on tiles
- Silicone coming away from the tiles
Questions to ask before you book
- If travel is included in the price
- The length of the guarantee and what it covers
- What protection goes down before work starts
- When it can be used again
How the visit works
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow about two hours for a bath from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
