Wiltshire · England
Bath Resealing in Potterne
We travel to Potterne for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- An untidy old seal
- Gaps by the taps
- Sealant that is split or lifting
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Keep bottles off the joints
- Clean the joints with a mild cleaner
- Let steam out after showers
- Reseal when black spots will not clean off
Avoid scraping the joints, and do not stand bottles on the seal.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
Bath resealing in Potterne without replacing anything
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. Our technicians work on wet rooms, shower trays & enclosures and kitchen worktops & sinks, and people most often call us about discoloured, yellow sealant and a messy previous reseal.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Location
- Potterne (SN10)
- Region
- Wiltshire
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Our work in Potterne
Potterne is about 2 miles south-west of Devizes, in Wiltshire. Across the SN10 area, we come to you. Potterne is one of 425 places in Wiltshire we cover. Our nearest city page is Birmingham, about 79 miles away.
Every address in SN10 is covered, from the main roads to the quietest streets. Whether you live on High Street, The Butts and Highlands or a nearby road, a technician can come to you. We also travel to Potterne Wick (1 mile south), Worton (1 mile south-west), Poulshot (2 miles north-west), Townsend (2 miles west) and Marston (2 miles south-west). We also work in nearby towns such as Trowbridge (9 miles west), Chippenham (10 miles north-west), Calne (8 miles north), Westbury (9 miles south-west), Melksham (6 miles north-west) and Warminster (12 miles south-west).
Near you in Potterne
Our clients here include homes close to Church of St Mary, Five Lanes Primary School and Devizes School and the streets around them. Other landmarks nearby include Wiltshire Fire Defence And Brigades Museum (0.5 miles south-west) and Devizes Castle (1.7 miles north). Open spaces near Potterne include King's Play Hill.
- Local facilities include Kennet (1.8 miles north)
Other services in Potterne
Common problems we fix in Potterne
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
Typical reasons for a call-out include:
- Sealant that’s split or lifting
- Old sealant that looks dirty
- Leaks at the edges
- Mould you cannot clean out
Comparing quotes
- What happens if the damage is worse than the pictures show
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
FAQs for Potterne
What happens once I’ve sent photos?
We review the pictures and send a fixed quote.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you come to Potterne?
Yes. We work across the UK and come to Potterne. Send photos and we’ll quote, or call 0345 017 0787.
How long does resealing take?
Most reseals take about two hours. It then needs time to cure.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
My seal keeps tearing. Why?
Something is moving. Persistent splitting can mean the support needs attention.
Different materials, different repairs
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
When a repair is not the answer
We will always be straight with you, so here’s what a repair will not do:
- Hollow or loose tiles
- A flexing bath
- Very wide gaps that need a trim
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Wet rooms
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Why reseal now?
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Normally one visit, start to finish
See our full price list.
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a couple of hours, and the room is left clean and tidy.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Clear the area around the damage
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
