Cumbria · England
Bath & shower resealing (mastic) in Marton, Cumbria
Local bath resealing for Marton: photo quotes, tidy work and a year’s guarantee.
- Missing sealant behind the taps
- An untidy old seal
- Stained silicone
How we handle bath resealing in Marton
All of the old sealant is cut out, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We are often asked to fix discoloured, yellow sealant and missing sealant behind the taps, across kitchen worktops & sinks, baths and wet rooms.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Marton (LA12)
- Region
- Cumbria
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Marton
If you manage property in Marton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Other services in Marton
Resealing in Marton: why it matters
Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Marton customers choose us
- We’ll tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- Rooms protected and left tidy
- Nothing taken out or refitted
Take a look at our prices page.
Where we work around Marton
Marton is about 3 miles west of Ulverston, in Cumbria. Wherever you are in the LA12 postcode area, a technician comes to you. Marton is one of 438 places in Cumbria we cover. You can also see our page for Liverpool, about 54 miles away.
We work across the LA12 postcode area. Close by, we cover Lindal in Furness (1 mile south-east), Ireleth (1 mile west), Pennington (1 mile east), Paradise (1 mile north-west) and Dalton-in-Furness (2 miles south). Within a short drive, we also cover Barrow-in-Furness (5 miles south-west), Ulverston (3 miles east), Hindpool (5 miles south-west), Salthouse (5 miles south), Risedale (5 miles south) and Vickerstown (6 miles south-west).
Local landmarks in Marton
Our clients here include homes close to Church of St Peter, Dowdales School and Lindal and Marton Primary School, among other places. Marton’s nearest station is Askam station, roughly 1.7 miles west of the centre. Further afield, we also cover the area around Furness General Hospital (3.6 miles south-west) and Laurel And Hardy Museum (3 miles east). Open spaces near Marton include High Moor and Urswick Tarn.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Marton: your questions answered
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
How much does bath resealing cost in Marton?
Because every job differs, we price from pictures. You will get a fixed figure before you book.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Do you cover the whole of Cumbria?
All of Cumbria, and the rest of the UK. There is no extra charge for travel.
Why does the silicone keep cracking?
Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a couple of hours. At the end we talk you through the curing time and the aftercare.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Open a window if you can
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price the same day in most cases.
Advice
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
- Gaps too big for silicone alone
If in doubt, send photos and we’ll say what we think.
What we work on
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
- Baths
Prices and what affects them
We do not charge extra for travel to Marton. The price comes down to:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- What kind of damage it is
- The size and number of damaged areas
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Any details about the material
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Use the extractor fan
- Clean the joints with a mild cleaner
- Dry the seal after bathing
- Air the room after use
Let it cure fully before using the bath or shower, usually around 24 hours.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Signs you need bath resealing in Marton
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
Common reasons people in Marton contact us include:
- Missing sealant behind the taps
- Damp near the bath
- Sealant that is split or lifting
- Black spots in the silicone
What to look for in a quote
- The length of the guarantee and what it covers
- How to care for the finish
- What prep work is covered
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
