Middlesbrough · England

Bath & shower resealing (mastic) in Marton, Middlesbrough

Bath resealing for Marton, without a refit. Send us photos for a fixed price, then book a visit.

  • Leaks at the edges
  • Stained silicone
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Marton

Bath resealing in Marton without replacing anything

Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. If you’re dealing with silicone smeared on tiles and discoloured, yellow sealant, we can normally put it right.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Where
Marton (TS4, TS7, TS8)
County
Middlesbrough
Guarantee
A year, on every repair
Price
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Landlords, agents and businesses in Marton

We carry out planned and one-off repairs for housing associations and facilities teams in Middlesbrough and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How the visit works

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes about two hours for a bath. We leave the room clean and you’ll know when it can be used.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Get a fixed price

Read more

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Why it’s worth resealing in Marton

Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Our prices are the same across the UK, with no extra for Marton. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Marton

  • Rooms protected and left tidy
  • Normally one visit, start to finish
  • Repair technicians who travel to you, UK-wide
  • No need to remove anything

Read our pricing.

Aftercare tips

Simple care helps the repair last. Our advice:

  • Let steam out after showers
  • Clean the sealant gently and regularly
  • Run the extractor fan during and after showers
  • Reseal when black spots won’t clean off

Let it cure fully before using the bath or shower, normally about a day.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

Signs you need bath resealing in Marton

Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.

It’s worth getting a quote if you see:

  • Black mould in the sealant
  • Stained silicone
  • Silicone smeared on tiles
  • Unsealed corners

Before you book anyone

  • What happens if they find more damage
  • How long the guarantee is and what it covers
  • When it can be used again
  • How your room will be protected

How to compare quotes

How we price bath resealing

Prices are worked out job by job, from your photos. The main factors are:

  • How many areas need work
  • Whether we combine several jobs
  • The type of damage
  • How hard the colour is to match

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Getting a price from photos

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A wider photo showing the entire bath or shower
  • Whether it’s been repaired or coated before
  • The material, if you know it
  • Good light, ideally daylight, without flash glare

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Marton and nearby

Marton is about 1 mile south of Middlesbrough, in Middlesbrough. Whether you are in the middle of Marton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 33 places across Middlesbrough, from the larger towns to small villages. We work right across the region, from Marton to Newcastle upon Tyne (35 miles away).

Every address in TS4, TS7 and TS8 is within our area. Whether you live on Lacy Road, Dante Road and Epsom Avenue or anywhere nearby, we can come to you. Being close to the A172, Marton is easy for our repair technicians to reach. We also cover the places around Marton: Saltersgill (1 mile north-west), Tollesby (1 mile south), Middlesbrough (1 mile north), Coulby Newham (1 mile south) and Berwick Hills (2 miles north). Larger places within reach include Whale Hill (3 miles north-east), Newtown (5 miles north-west), Oxbridge (5 miles west), Tilery (4 miles north-west), Bowesfield (5 miles west) and Portrack (4 miles north-west).

What’s near Marton

In Marton, that means homes near Newlands School FCJ, Trinity Catholic College and Saint Agnes and the streets around them. You’ll also find Easterside Academy (under half a mile west), Stewart Park (within half a mile east) and Viking Hotel (under half a mile north-west). Marton’s nearest station is Marton station, about 0.6 miles north-east of the centre. Further afield, we also cover the area around Newham Grange Farm Museum (0.7 miles south-west) and James Cook University Hospital (0.8 miles north). Not far away are Eston Nab and RSPB Salthome.

  • Local facilities include Cleveland (1.4 miles south-east)
Map of Marton © OpenStreetMap contributors

Common questions in Marton

Why does the silicone keep cracking?

Something is moving. Persistent splitting can mean the support needs attention.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Do you work in Marton?

Yes. We cover the entire UK and travel to Marton and the rest of Middlesbrough. Send pictures and we’ll quote, or call 0345 017 0787.

What areas do you cover?

We work UK-wide, and that includes Marton. Our prices are the same everywhere.

It’s been repaired before. Can you still fix it?

Typically, yes. We remove the old repair before doing a new one.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.