Plymouth · England
Bath & shower resealing (mastic) in Millbridge, Plymouth
Our repair technicians come to Millbridge for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Discoloured, yellow sealant
- Water getting behind the bath or tray
- Mould you cannot clean out
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Run the extractor fan during and after showers
- Reseal at the first sign of lifting
- Air the room after use
- Clean the joints with a mild cleaner
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our bath resealing in Millbridge
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We are often asked to fix mould you can’t clean out and an untidy old seal, across shower trays & enclosures, baths and wet rooms.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Millbridge (PL1, PL3, PL2)
- Area hub
- Plymouth
- Warranty
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath resealing costs
We charge the same across the UK, including Millbridge. What changes the price is:
- The size and number of damaged areas
- What the surface is made of
- Where the damage is and how we get to it
- What kind of damage it is
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- Details of any past repairs
- Where you are, by postcode
- A clear, close picture of the problem area
- A wider photo showing the entire bath or shower
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.
Millbridge questions
How do I book?
Use the quote form or ring 0345 017 0787.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you seal over the old sealant?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
How long does a reseal take?
A bath or shower usually takes a couple of hours. It then needs time to cure.
When we’d advise against a repair
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Loose tiles, which need refixing first
- Movement in the bath or tray
- Gaps too big for silicone alone
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Baths
Do you need bath resealing in Millbridge?
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.
Keep an eye out for any of the following:
- Leaks at the edges
- Mould you can’t clean out
- A messy previous reseal
- Missing sealant behind the taps
Comparing quotes
- What protection goes down before work starts
- How changes to the job are handled
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
We fill the bath before sealing, so the joint is at its widest.
Why reseal now?
Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why us?
- CHAS and Constructionline accredited
- One visit for most repairs
- Everything repaired in place
- Same prices wherever you are
Read our pricing.
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a couple of hours. Before we go, we’ll explain how long to leave it and how to look after it.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Get a quote
If you’re in Millbridge and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
About Millbridge
Millbridge is about 1 mile north-east of Stonehouse, in Plymouth. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 59 places in Plymouth, from the larger towns to small villages.
We cover every part of PL1, PL3 and PL2 and the streets around it. From Alma Road, Stoke Road and Wilton Road or a nearby road, we can come to you. If you are just outside Millbridge, we cover Ford (1 mile north-west), Stoke (1 mile north-west), Stonehouse (1 mile south-west), Milehouse (1 mile north) and Hoe (1 mile south-east). Within a short drive, we also cover Burraton (4 miles north-west), Plympton St Maurice (5 miles east), Plymstock (3 miles south-east), Sherford (5 miles east), St Stephens (4 miles north-west) and Eggbuckland (3 miles north-east).
Local landmarks in Millbridge
In Millbridge, that means homes near Devonport High School for Boys, Church of St Barnabas and Edgcumbe Hotel. Other local landmarks include City College Plymouth (0.5 miles south-west), Victoria Park (under half a mile south-east), Stuart Road Primary School (within half a mile north-east) and Plymouth Central Library (0.6 miles east). The nearest railway station is Devonport station, roughly 0.6 miles west. Nearby you’ll also find Plymouth General Hospital (1.2 miles west) and Plymouth Castle (1.2 miles south-east). For a walk, there is Penlee Battery.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Also near Millbridge
What else we do in Millbridge
About our accreditations · Every repair comes with a one-year guarantee.
