North Lanarkshire · Scotland

Bath & shower resealing (mastic) in Moffat Mills, North Lanarkshire

Bath resealing for Moffat Mills, without a refit. Send us pictures for a fixed quote, then we come to you.

  • Silicone smeared on tiles
  • Stained silicone
  • Unsealed corners
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Moffat Mills?

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, for the same reason.

How we handle bath resealing in Moffat Mills

A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. We regularly repair basins & vanity units, baths and kitchen worktops & sinks, and the jobs we see most are black mould in the sealant and stained silicone.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Technician in a mask working on a freestanding roll-top bath
Where
Moffat Mills (ML6)
Area hub
North Lanarkshire
Warranty
A year, on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

What bath resealing costs

We don’t charge extra for travel to Moffat Mills. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • Access to the area

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what to send:

  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • A wider photo showing the entire bath or shower
  • Good light, ideally daylight, without flash glare

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a couple of hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Ensure the area is dry
  • Let us know if it has been repaired before

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a fixed price

Read more

What we are called out for in Moffat Mills

Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.

The most common problems we are called about are:

  • Missing sealant behind the taps
  • Water getting behind the bath or tray
  • Old sealant that looks dirty
  • Gaps in the seal

Questions to ask before booking

  • Who will actually do the work
  • How the room is protected while they work
  • Whether the price is fixed and includes VAT
  • How to look after the finish

How to compare quotes

Landlord and trade work in Moffat Mills

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Moffat Mills and the surrounding area

Moffat Mills is about 2 miles east of Airdrie, in North Lanarkshire. Jobs in Moffat Mills are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in all 89 towns and villages across North Lanarkshire. Our jobs stretch from Moffat Mills to Glasgow (13 miles away).

Here we cover the ML6 postcode area. That includes homes on Invervale Avenue, Ardfern Road and Achnasheen Road and the roads around them. We also travel to Gartness (1 mile south-west), Plains (1 mile north), Chapelhall (2 miles south), Airdrie (2 miles west) and Airdriehill (2 miles north-west). We also work in nearby towns such as Motherwell (5 miles south), Cumbernauld (7 miles north), Coatbridge (4 miles west), Wishaw (6 miles south), Bellshill (5 miles south-west) and Kilsyth (9 miles north-west).

Around Moffat Mills

Our clients here include homes close to Airdrie Academy and Airdrie and the streets around them. Moffat Mills’s nearest station is Drumgelloch station, about 0.7 miles north-west. A little further out are Wester Moffat Hospital (0.5 miles north-west) and Airdrie Museum (1.9 miles west).

Map of Moffat Mills © OpenStreetMap contributors

When we would advise against a repair

We won’t take on work that won’t last, so these are the limits:

  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Basins & vanity units

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Your questions about bath resealing in Moffat Mills

Why does the silicone keep cracking?

Normally because the bath or tray moves. We seal baths full of water.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across North Lanarkshire.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send pictures.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote with dates.

What areas do you cover?

We work UK-wide, so Moffat Mills is covered. Our prices are the same everywhere.

Aftercare tips

How the surface is treated afterwards matters:

  • Reseal at the first sign of lifting
  • Don’t stand toiletries on the seal
  • Clean the sealant gently and regularly
  • Use the extractor fan

Let it cure fully before using the bath or shower, typically around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.