Greater London · England
Bath & shower resealing (mastic) in Moor Park, Greater London
Our repair technicians come to Moor Park for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Leaks at the edges
- Old sealant that looks dirty
- Black mould in the sealant
Moor Park and the surrounding area
Moor Park is about 2 miles south-east of Rickmansworth, in Greater London. Customers in Moor Park get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Moor Park is one of 764 places in Greater London where we work. You can also see our page for London, about 17 miles away.
Jobs in HA6 and WD3 work the same way as everywhere else we cover. Streets in the area include Bedford Road, Ormonde Road and Russell Road, and we cover them all. We also travel to Batchworth Heath (1 mile west), Northwood (1 mile south-east), Eastbury (1 mile east), Batchworth (1 mile west) and Woodcock Hill (2 miles west). Further out, we also cover City of Westminster (14 miles south-east), Marylebone (14 miles south-east), Kensington (13 miles south-east), St Pancras (15 miles south-east), Hampstead (12 miles south-east) and Ruislip (3 miles south).
Near you in Moor Park
Locally, our jobs take us to homes close to The Prince of Wales pub, Eastbury Farm Primary School and Rickmansworth School, among other places. Also close by are King George V Playing Fields (1.4 miles north-east), St Martins School Northwood (0.5 miles south) and Holy Trinity Church (0.7 miles south). Moor Park’s nearest station is Rickmansworth station, about 2.1 miles north-west of the centre. Nearby you’ll also find Hilfield Castle (4.7 miles north-east) and Harlequin Centre (2.8 miles north-east). Open spaces near Moor Park include Dews Farm Sand Pits and Tumbling Bay.
- Parks and local facilities nearby include Maple Cross and Mill End (2.6 miles west)
About our bath resealing in Moor Park
We reseal baths, shower trays, basins and worktops. A typical reseal takes a couple of hours, plus curing time. If you’re dealing with a messy previous reseal and silicone coming away from the tiles, we can help, on baths, shower trays & enclosures and basins & vanity units alike.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Moor Park (HA6, WD3)
- County
- Greater London
- Warranty
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a couple of hours. At the end we talk you through the curing time and the aftercare.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Let the surface dry out before the visit
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
How we price bath resealing
We price every job individually, from your pictures. The main factors are:
- What the surface is made of
- The type of damage
- Doing more than one item at once
- How much damage there is
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A picture taken from further back
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
What we can’t put right
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
- Gaps too big for silicone alone
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Baths
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
Landlords, agents and businesses in Moor Park
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Signs you need bath resealing in Moor Park
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
You may need us if you’ve spotted any of these:
- An untidy old seal
- Mould you cannot clean out
- Leaks at the edges
- Old sealant that looks dirty
What to look for in a quote
- How changes to the job are handled
- Who turns up on the day
- How the colour is matched
- If travel is included in the price
Why it’s worth resealing in Moor Park
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list.
Different materials, different repairs
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
How to care for the repair
Once the work has cured, treat it gently:
- Store bottles on a shelf
- Dry the seal after bathing
- Give the seal a regular clean
- Replace the seal when mould sets in
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Moor Park: your questions answered
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Greater London.
When can I use the bath after resealing?
We will give you the curing time.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you come to Moor Park?
Yes. We cover the whole UK and travel to Moor Park and the rest of Greater London. Send photos and we will quote, or call 0345 017 0787.
Are there extra charges for Moor Park?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you reseal over the old silicone?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Nearby places to Moor Park
Other services in Moor Park
About our accreditations · Every repair comes with a one-year guarantee.
