Dorset · England

Bath & shower resealing (mastic) in Moreton, Dorset

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Moreton. Send pictures for a free, fixed quote.

  • Old sealant that looks dirty
  • Gaps by the taps
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Moreton

Bath resealing at your home in Moreton

Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. If you are dealing with black mould in the sealant and leaks at the edges, we can help.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Roll-top bath being refinished by a Surface Doctor technician
Where
Moreton (DT2)
Region
Dorset
Guarantee
12 months on all our work
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

Why it’s worth resealing in Moreton

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why us?

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your pictures

See our prices page.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

Repairs by material

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Aftercare tips

To keep it looking its best:

  • Ventilate the bathroom well
  • Reseal at the first sign of lifting
  • Do not stand toiletries on the seal
  • Let steam out after showers

Avoid scraping the joints, and keep shampoo bottles off the joints.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

About Moreton

Moreton is about 7 miles east of Dorchester, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Moreton is one of 462 places in Dorset where we work.

Every address in DT2 is covered, from the main roads to the quietest streets. Jobs here include addresses on The Street, Hurst Road and The Common and the roads around them. We also cover the places around Moreton: Briantspuddle (2 miles north), Affpuddle (3 miles north), Throop (3 miles north-east), Tolpuddle (3 miles north) and Warren (3 miles north-east). Further out, we also cover Weymouth (10 miles south-west), Dorchester (7 miles west), Wimborne Minster (15 miles north-east), Blandford Forum (12 miles north-east), Broadstone (13 miles east) and Corfe Mullen (12 miles east).

Near you in Moreton

Locally, our jobs take us to homes close to St Nicholas Church, among other places. The closest station to Moreton is Moreton (Dorset) station, about 1.5 miles west of the centre. Nearby you will also find Tolpuddle Martyrs Museum (3.3 miles north). The countryside around Moreton includes Black Hill and Tadnoll and Winfrith Heath.

Map of Moreton © OpenStreetMap contributors

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Housing associations and facilities teams use us for planned and reactive repairs in Dorset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Prices and what affects them

We price every job individually, from your photos. What matters most is:

  • Whether we combine several jobs
  • How hard the colour is to match
  • Previous DIY repairs that have to come out
  • What kind of damage it is

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • One picture of the entire bath or shower
  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Questions from Moreton

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

How quickly can you book me in?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Can you redo someone else’s repair?

Typically, yes. The old repair comes out first, so mention it when you send photos.

What happens if you find more damage?

Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.

Do you charge for travel?

We don’t add a call-out fee. Your fixed quote includes everything.

Do you seal over the old sealant?

We always remove the old sealant completely. New silicone won’t bond to old.

Which areas do you work in?

All of Dorset, and the rest of the UK. Travel is included in the price.

What we’re called out for in Moreton

Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.

Common reasons people in Moreton contact us include:

  • Old sealant that looks dirty
  • Mould you can’t clean out
  • Water getting behind the bath or tray
  • Sealant that’s split or lifting

Comparing quotes

  • How soon you can use it again
  • How your room will be protected
  • How changes to the job are handled
  • If travel is included in the price

Our hiring checklist

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a couple of hours. We clean up when we are done and tell you when it’s ready to use.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Point us to the nearest place to park
  • Open a window if you can

Ask for a price

Send us photos of the damage and a wider shot of the whole item, with your DT2 postcode, and we will come back with a fixed quote.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.