Greater London · England
Bath Re-enamelling for Mortlake homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Mortlake. Free, fixed quotes from your photos.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that is failing
Bath re-enamelling in Mortlake, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the next day. Whether it’s lots of chips and rust spots and a coloured bath you want in white, we can help, on basins & shower trays, Victorian roll-tops and pressed steel baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Mortlake (SW14, SW13, SW15)
- Area hub
- Greater London
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
Getting a price
Most customers in Mortlake get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Mortlake and nearby
Mortlake is about 3 miles west of Fulham, in Greater London. Whether you’re in the middle of Mortlake or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 764 towns and villages across Greater London. We work right across the region, from Mortlake to London (8 miles away).
We cover every part of SW14, SW13 and SW15 and the streets around it. Local streets include Elm Road, Well Lane and Coval Road, and we cover them all. Being close to the A3003, Mortlake is easy for our technicians to reach. Neighbouring places we cover include East Sheen (1 mile south-west), North Sheen (1 mile north-west), Barnes (1 mile north-east), Grove Park (1 mile north) and Roehampton (1 mile south-east). Within a short drive, we also cover London (8 miles east), City of Westminster (6 miles north-east), Marylebone (6 miles north-east), Kensington (4 miles north-east), St Pancras (8 miles north-east) and Shoreditch (9 miles north-east).
What’s near Mortlake
Our customers here include homes close to Hare and Hounds pub, Thomson House School and Ibstock Place School, among other places. Also close by are All Saints' Church (under half a mile south-east), Richmond Park Academy (less than half a mile south-east) and Palewell Park (0.5 miles south). There is a railway station in Mortlake itself: Mortlake station. Further afield, we also cover the area around Barnes Hospital (under half a mile east) and Ubuntu Museum: African Museum of Humanity (1.1 miles south-east). The countryside around Mortlake includes Richmond Hill and Kew Gardens Lake.
- Parks and local facilities nearby include Municipal Borough of Acton (2.8 miles north)
When we would advise against a repair
Some jobs are not right for a repair, including:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Also near Mortlake
Other services in Mortlake
Do you need bath re-enamelling in Mortlake?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
The most common problems we are called about are:
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
What to look for in a quote
- Whether there are any call-out or travel charges
- Who turns up on the day
- How to look after the finish
- What prep work is covered
Questions from Mortlake
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How long does re-enamelling take?
One day for most baths, ready the next day. We’ll confirm timings when we quote.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you come to Mortlake?
Yes, we do. Repair technicians travel to Mortlake from across the region, and the price is the same as everywhere else.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What affects the price in Mortlake
Prices start from £350. There is no charge for travel to Mortlake. The price depends on:
- How hard the colour is to match
- How easy the damage is to reach
- The material and finish
- How many areas need work
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Mortlake customers choose us
- One visit for most repairs
- Every repair guaranteed for a year
- Fixed prices from your photos
- Nothing taken out or refitted
See our prices page and resurfacing vs replacement cost guide.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
