Moray · Scotland

Bath & shower resealing (mastic) in Newton, Moray

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Newton. Send photos for a free, fixed quote.

  • Missing sealant behind the taps
  • Gaps in the seal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Newton homes

Bath resealing in Newton, done in place

All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We regularly repair kitchen worktops & sinks, wet rooms and basins & vanity units, and common reasons people get in touch are an untidy old seal and leaks at the edges.

You get a one-year guarantee, the same in Newton as everywhere else we work.

Area
Newton (IV30)
County
Moray
Guarantee
A year, on every repair
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Replace the seal when mould sets in
  • Ventilate the bathroom well
  • Clean the sealant gently and regularly
  • Keep bottles off the joints

Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.

Black mould in sealant is not just unsightly. An early reseal keeps water where it belongs.

Our work in Newton

Newton is about 3 miles west of Elgin, in Moray. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Newton is one of 58 places in Moray where we work.

Here we cover the IV30 postcode area. Close by, we cover Pittendreich (2 miles south-east), Alves (2 miles west), Miltonduff (2 miles south), College of Roseisle (3 miles north-west) and Elgin (3 miles east). Within a short drive, we also cover Forres (9 miles west), Lossiemouth (6 miles north-east), Ashgrove (4 miles east), Burghead (5 miles north-west), Fochabers (11 miles east) and Hopeman (4 miles north). For island and remote addresses, call first so we can plan the visit.

Around Newton

Around Newton, we work in homes near Spynie Parish Church and Enclosing Walls, among other places. The closest station to Newton is Elgin station, roughly 3.2 miles east of the centre. A little further out are The Oaks (2 miles east) and Quarrelwood Castle (1.1 miles north-east). Green spaces nearby include Loch Spynie.

Map of Newton © OpenStreetMap contributors

FAQs for Newton

Which areas do you work in?

The whole UK, including all of Moray. Just include your postcode and we’ll confirm dates.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you charge for travel?

There’s no separate call-out charge. The fixed price covers the visit and the work.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Why does mould come back so fast?

Damp is the cause. Ventilation and drying keep it clean longer.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Signs you need bath resealing in Newton

Even good sealant eventually discolours. Steam, soap and movement all take their toll.

Common reasons people in Newton contact us are:

  • Sealant that is split or lifting
  • Silicone smeared on tiles
  • Black mould in the sealant
  • Discoloured, yellow sealant

Comparing quotes

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • What protection goes down before work starts
  • How soon you can use it again

How to compare quotes

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Is resealing worth it?

Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.

What you get with us

  • We leave the room as we found it
  • No extra charge for your area
  • Work done at your home or business
  • No need to remove anything

See our pricing.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

What affects the price in Newton

You won’t pay by the hour. The price is based on:

  • How many areas need work
  • The material
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

How to get a fixed quote

You can normally get a fixed price without us visiting. To make it quick:

  • A coin beside the damage so we can judge size
  • Any details about the material
  • Natural light rather than flash
  • Any earlier repairs or coatings

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

How it works

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes about two hours for a bath. Before we leave, we explain the curing time and the aftercare.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Getting ready for the visit

  • Clear the area around the damage
  • Open a window if you can
  • Keep a parking space free if you can

Ask for a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Get a free quote

Advice

When a repair is not the answer

In fairness, there are a few things a repair will not fix:

  • Very wide gaps that need a trim
  • A bath or tray that moves, until its support is fixed
  • Water damage behind the bath that needs a builder

Send us photos and we will tell you honestly.

Materials we repair

  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.