Redcar and Cleveland · England

Bath & shower resealing (mastic) in Newton Mulgrave, Redcar and Cleveland

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Newton Mulgrave and across Redcar and Cleveland. Free, fixed quotes from your photos.

  • An untidy old seal
  • Water getting behind the bath or tray
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Newton Mulgrave?

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

About our bath resealing in Newton Mulgrave

We reseal baths with them filled with water, so the joint is at its widest, so the seal doesn’t tear when the bath is first used. Whether it’s water getting behind the bath or tray and unsealed corners, we can help.

All our work comes with our one-year guarantee, wherever you are in Redcar and Cleveland.

Roll-top bath being refinished by a Surface Doctor technician
Area
Newton Mulgrave (TS13)
County
Redcar and Cleveland
Guarantee
12 months on all our work
Price
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

When a repair is not the answer

Some jobs are not right for a repair, including:

  • Water damage behind the bath that needs a builder
  • Tiles that move, until they’re refixed
  • Very wide gaps that need a trim

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units

Signs you need bath resealing in Newton Mulgrave

Most reseals are because of black mould. It grows into the silicone, so cleaning can’t get it all out.

Most people contact us after spotting something like this:

  • An untidy old seal
  • Stained silicone
  • Mould you cannot clean out
  • Leaks at the edges

What your quote should include

  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • Aftercare advice

Our hiring checklist

Looking after it afterwards

Looking after the surface is easy:

  • Keep bottles off the joints
  • Use the extractor fan
  • Keep the joints dry
  • Clean the joints with a mild cleaner

Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Your questions about bath resealing in Newton Mulgrave

When can I use the bath after resealing?

Normally after around 24 hours. We’ll tell you the exact time.

What areas do you cover?

The whole UK, including all of Redcar and Cleveland. Send your postcode with your pictures and we will confirm dates.

What happens next?

We come back with a fixed price, plus dates. You’re under no obligation.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

My seal keeps tearing. Why?

Usually because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

How do I book?

Use the quote form or ring 0345 017 0787, and we will take it from there.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

Trays are sealed with weight on them, for the same reason.

Where we work around Newton Mulgrave

Newton Mulgrave is about 7 miles north-west of Whitby, in Redcar and Cleveland. From the centre of Newton Mulgrave to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Newton Mulgrave is one of 48 places in Redcar and Cleveland where we work. You can also see our page for Newcastle upon Tyne, about 47 miles away.

Our technicians cover all of the TS13 postcode area and the streets around it. Nearby, we also work in Hinderwell (1 mile north-east), Ellerby (1 mile south-east), Runswick Bay (1 mile east), Port Mulgrave (1 mile north) and Mickleby (2 miles south-east). Within a short drive, we also cover Redcar (13 miles north-west), Guisborough (11 miles west), Eston (15 miles west), Marske-by-the-Sea (10 miles north-west), Grangetown (15 miles west) and Skelton-in-Cleveland (9 miles west).

Near you in Newton Mulgrave

We visit homes around The Brown Cow pub, Oakridge Community Primary School and Church of St Hilda, among other places. Nearby you’ll also find Mulgrave Castle (4 miles south-east) and Staithes Museum (2.1 miles north). Open spaces near Newton Mulgrave include Danby Beacon.

Map of Newton Mulgrave © OpenStreetMap contributors

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a couple of hours. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Getting ready for the visit

  • Open a window if you can
  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a fixed price

Related advice

Why it’s worth resealing in Newton Mulgrave

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why Newton Mulgrave customers choose us

  • Work done at your home or business
  • No need to remove anything
  • One price list for the whole UK
  • Fixed prices from your pictures

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.