Somerset · England

Bath Resealing in Oake

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Oake and across Somerset. Free, fixed quotes from your photos.

  • Gaps in the seal
  • A messy previous reseal
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Oake

What affects the price in Oake

There are no hourly rates or hidden extras. The price is based on:

  • How many items we do on one visit
  • How many areas need work
  • Where the damage is and how we get to it
  • The material and finish

We charge the same wherever you are, so there is no premium for Oake. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Send photos for a quote

Phone pictures are fine, there is no need for anything special. Ensure they show:

  • One sharp close-up of the damage
  • Natural light rather than flash
  • Where you are, by postcode
  • Details of any past repairs

The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Bath resealing at your home in Oake

The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. Typical jobs include gaps in the seal and discoloured, yellow sealant, on basins & vanity units, shower trays & enclosures and wet rooms.

We stand behind the work with a one-year guarantee.

Area
Oake (TA4)
Region
Somerset
Warranty
12 months on all our work
Quote
Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How it works

We work cleanly and quietly. We protect the area first, then the work takes around two hours. At the end we talk you through how soon it can be used and how to care for it.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Tell us about parking, stairs or access
  • Let us know which floor the room is on

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed quote, not an estimate.

Get a fixed price

Advice

When to call us in Oake

Even good sealant eventually discolours. Steam, soap and movement all take their toll.

Look out for these signs:

  • Mould you cannot clean out
  • Unsealed corners
  • An untidy old seal
  • Sealant that’s split or lifting

What your quote should include

  • Aftercare advice
  • Who turns up on the day
  • Whether the price covers travel
  • How long it needs to cure

How to compare quotes

Resealing in Oake: why it matters

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Oake clients choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Same prices wherever you are
  • A fixed quote before you book
  • We come to you, anywhere in the UK

See our pricing.

FAQs for Oake

Why does the silicone keep cracking?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

Can you quote from photos?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you cover the whole of Somerset?

Everywhere in the UK, Oake included. There is no extra charge for travel.

Can you redo someone else’s repair?

Normally, yes. The old repair comes out first, so mention it when you send photos.

What happens once I’ve sent pictures?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

Why does mould come back so fast?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

When we would advise against a repair

We will not take on work that will not last, so here’s what a repair can’t put right:

  • Gaps so wide they need filling or trims before sealing
  • Tiles that move, until they’re refixed
  • A bath or tray that moves, until its support is fixed

Send us photos and we’ll tell you honestly.

What we work on

  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units

Landlords, agents and businesses in Oake

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Dry the seal after bathing
  • Reseal at the first sign of lifting
  • Give the seal a regular clean
  • Store bottles on a shelf

Good ventilation is the best protection, and dry the joints after bathing.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

Covering Oake

Oake is about 3 miles north of Wellington, in Somerset. Across the TA4 area, we come to you. Oake is one of 640 places in Somerset where we work.

Our technicians cover all of the TA4 postcode area and the streets around it. We regularly work on streets such as Saxon Close and Oake Acres and the roads around them. Other places close to Oake include Hillcommon (1 mile north-west), Nynehead (2 miles south), Milverton (2 miles west), Ash Priors (2 miles north) and Fitzhead (3 miles north-west). Within a short drive, we also cover Taunton (5 miles east), Bridgwater (11 miles north-east), Chard (15 miles south-east), Wellington (3 miles south), Sydenham (12 miles north-east) and Wilton (4 miles east).

Local landmarks in Oake

Locally, our jobs take us to homes close to Church of St Bartholomew, The Royal Oak pub and Oake. For rail, the closest station is Taunton station, about 4.6 miles east. Other landmarks nearby include Taunton Castle (4.1 miles east) and Blazes (3 miles north). Open spaces near Oake include Knowle Hill.

Map of Oake © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.