Warwickshire · England
Bath & shower resealing (mastic) in Old Milverton, Warwickshire
Local bath resealing for Old Milverton: photo quotes, tidy work and a year’s guarantee.
- An untidy old seal
- Damp near the bath
- Black spots in the silicone
Resealing in Old Milverton: why it matters
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why choose Surface Doctor in Old Milverton
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- No extra charge for your area
Take a look at our prices page.
Bath resealing in Old Milverton, done in place
Baths are resealed with water in them, so the joint is at its widest, so the seal does not tear when the bath is first used. If you’re dealing with leaks at the edges and old sealant that looks dirty, we can typically put it right.
Every repair comes with a one-year guarantee.
- Location
- Old Milverton (CV32)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
Baths are resealed with water in them, to open the joint fully.
Our work in Old Milverton
Old Milverton is about 2 miles north-west of Royal Leamington Spa, in Warwickshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Old Milverton is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Old Milverton to Birmingham (18 miles away).
Our visits in CV32 work the same way as everywhere else we cover. Neighbouring places we cover include Hill Wootton (1 mile north), Blackdown (1 mile north-east), Leek Wootton (1 mile north-west), Ashow (1 mile north-east) and Lillington (2 miles east). Within a short drive, we also cover Rugby (14 miles east), Stratford-upon-Avon (10 miles south-west), Bedworth (12 miles north), Kenilworth (3 miles north), Fordbridge (15 miles north-west) and Southam (8 miles south-east).
Local landmarks in Old Milverton
Typical jobs here are in homes near Saxon Mill pub, Brookhurst Primary School and St. Nicholas' Park. Other local landmarks include Church of Saint James the Great (within half a mile west), Trinity Catholic School (0.6 miles south-east) and The Kingsley School (1.1 miles south-east). The nearest railway station is Warwick station, roughly 1.5 miles south-west of the centre. Nearby you will also find Warwick Castle (2 miles south-west) and Leamington Spa Art Gallery and Museum (1.6 miles south-east). Open spaces near Old Milverton include Oxpen Meadow Lake.
How we price bath resealing
We charge the same across the UK, including Old Milverton. The price reflects:
- Whether old repairs or coatings need taking off
- The type of damage
- Unusual colours or finishes
- How many items we do on one visit
The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Where you are, by postcode
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
FAQs for Old Milverton
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
Why does mould come back so fast?
Generally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can new silicone go over old?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
How long does a reseal take?
Usually a couple of hours, plus curing time.
Also near Old Milverton
What else we do in Old Milverton
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take about two hours for a bath, and you can get on with other things while we are there.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Related advice
Honest limits
A repair isn’t right for every job, including:
- Movement in the bath or tray
- Hidden water damage
- Tiles that move, until they’re refixed
Send us pictures and we will tell you honestly.
What we work on
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
- Wet rooms
Signs you need bath resealing in Old Milverton
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
People generally call us when they notice something like this:
- Unsealed corners
- Silicone coming away from the tiles
- Water getting behind the bath or tray
- A messy previous reseal
What to look for in a quote
- Whether there are any call-out or travel charges
- How your room will be protected
- What happens if they find more damage
- How long the guarantee is and what it covers
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Keeping it looking good
So the finish stays in good condition:
- Don’t stand toiletries on the seal
- Clean the joints with a mild cleaner
- Ventilate the bathroom well
- Let steam out after showers
Let it cure fully before using the bath or shower, normally around 24 hours.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
