Dorset · England

Bath Resealing in Overcombe

We travel to Overcombe for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Black spots in the silicone
  • Water getting behind the bath or tray
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Overcombe homes

About our bath resealing in Overcombe

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why so many DIY reseals peel. Our repair technicians work on shower trays & enclosures, wet rooms and kitchen worktops & sinks, and common reasons people get in touch are a messy previous reseal and mould you can’t clean out.

Whatever the size of the job, you get the same one-year guarantee in Overcombe and across Dorset.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Overcombe (DT3)
Region
Dorset
Warranty
12 months on all our work
Price
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Covering Overcombe

Overcombe is about 2 miles north-east of Weymouth, in Dorset. From the centre of Overcombe to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 462 towns and villages in Dorset.

Jobs in DT3 are booked in the same way as anywhere else. Streets in the area include Bodkin Lane, Preston Road and Enkworth Road, and we cover them all. Nearby, we also work in Littlemoor (1 mile north-west), Greenhill (1 mile south-west), Melcombe Regis (1 mile south-west), Preston (1 mile north-east) and Sutton Poyntz (1 mile north-east). Within a short drive, we also cover Dorchester (5 miles north), Portland (6 miles south), Fordington (6 miles north), Wareham (14 miles east), Fortuneswell (5 miles south) and Chickerell (3 miles west).

Around Overcombe

We visit homes around St John's Church of England Primary School, Nothe Gardens and Weymouth Bay Methodist Church, among other places. For rail, the closest station is Weymouth station, roughly 1.5 miles south-west. Well-known places in the area include Portwey Hospital (2.3 miles south-west) and Wessex Water Museum (1.6 miles north-east). Open spaces near Overcombe include Jordan Hill and Radipole Lake.

Map of Overcombe © OpenStreetMap contributors

Why it’s worth resealing in Overcombe

Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. We remove the old sealant completely. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • One-year guarantee on every repair
  • No extra charge for your area
  • We come to you, anywhere in the UK

See our pricing.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Baths

We fill the bath before sealing, so the joint is at its widest.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Clean the joints with a mild cleaner
  • Keep the joints dry
  • Open a window after bathing
  • Replace the seal when mould sets in

Keep the room well ventilated, and dry the joints after bathing so mould struggles to take hold.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

Questions from Overcombe

Do you cover the entire of Dorset?

Everywhere in the UK, Overcombe included. There’s no extra charge for travel.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you come to Overcombe?

Yes. We work across the UK and travel to Overcombe. Send pictures and we’ll quote, or call 0345 017 0787.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

Can you quote from pictures?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

How do I stop mould in sealant?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

What we can’t put right

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Loose tiles, which need refixing first
  • Gaps so wide they need filling or trims before sealing
  • A flexing bath

Send us photos and we will tell you honestly before you book.

Materials we work on in Overcombe

  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks

Common problems we fix in Overcombe

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

It’s worth getting a quote if you see:

  • Leaks at the edges
  • Silicone coming away from the tiles
  • Stained silicone
  • Gaps by the taps

What your quote should include

  • Whether the price covers travel
  • Who turns up on the day
  • How the colour is matched
  • What happens if they find more damage

Our hiring checklist

How the visit works

There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take a couple of hours.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Getting ready for the visit

  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit

Ask for a price

Most clients in Overcombe get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Related advice

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.