Medway · England
Bath & shower resealing (mastic) in Park Wood, Medway
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Park Wood and across Medway. Free, fixed quotes from your pictures.
- Mould you cannot clean out
- Sealant that is split or lifting
- Old sealant that looks dirty
About our bath resealing in Park Wood
Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Whether it’s silicone coming away from the tiles and black spots in the silicone, we can normally put it right, on shower trays & enclosures, wet rooms and kitchen worktops & sinks alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Park Wood (ME8, ME9)
- Area hub
- Medway
- Cover
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Park Wood and nearby
Park Wood is about 2 miles south-east of Gillingham, in Medway. Whether you’re in the middle of Park Wood or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Park Wood is one of 68 towns and villages in Medway where we work. Our nearest city page is London, about 32 miles away.
Our technicians cover all of the ME8 and ME9 postcode area and the streets around it. Jobs here include addresses on Beke Road, Bond Road and Nares Road. If you’re just outside Park Wood, we cover Wigmore (1 mile north), Kemsley Street (1 mile south-west), Hempstead (1 mile west), Bredhurst (1 mile south-west) and Scragged Oak (2 miles south). Larger places within reach include Chatham (3 miles west), Rochester (5 miles north-west), Strood (6 miles north-west), Luton (3 miles north-west), Hoo St Werburgh (6 miles north) and Chatham Waterfront (4 miles north-west). Being one of Medway’s larger places, Park Wood sees plenty of our work.
What’s near Park Wood
Typical jobs here are in homes near Rainham School for Girls, Howard School and Park Wood Infant School and the streets around them. You’ll also find Foxburrow Wood (less than half a mile north) and St Paul's Church (under half a mile north-west). Park Wood’s nearest station is Rainham (Kent) station, roughly 1.5 miles north. A little further out are Medway Maritime Hospital (3.4 miles north-west). Open spaces near Park Wood include Bishop Saltings and Detling Hill.
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
- Water damage behind the bath that needs a builder
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Baths
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Park Wood use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Prices and what affects them
We charge the same across the UK, including Park Wood. The price reflects:
- Access to the area
- The colour and finish to match
- The material and finish
- How much damage there is
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- The postcode, so we can plan the visit
- Any details about the material
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Park Wood: your questions answered
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
How do I book?
Use the quote form or ring 0345 017 0787.
Why does my sealant keep going mouldy?
Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
What does bath resealing cost?
Because every job differs, we price from photos. You’ll get a fixed figure before you book.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Replace the seal when mould sets in
- Open a window after bathing
- Store bottles on a shelf
- Keep the joints dry
Good ventilation is the best protection, and wipe the joints after use.
Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
The process
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It generally takes a couple of hours, and you can get on with other things while we’re there.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Advice
Common problems we fix in Park Wood
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
Typical reasons for a call-out include:
- Mould you cannot clean out
- Water getting behind the bath or tray
- Sealant that’s split or lifting
- Unsealed corners
What your quote should include
- Whether the price is fixed and includes VAT
- If travel is included in the price
- Who turns up on the day
- What prep work is covered
Nearby places to Park Wood
Also in Park Wood
About our accreditations · Every repair comes with a one-year guarantee.
