Wiltshire · England
Bath Resealing in Paxcroft Mead
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Paxcroft Mead and across Wiltshire. Send photos for a free, fixed quote.
- An untidy old seal
- Stained silicone
- Gaps by the taps
Bath resealing in Paxcroft Mead, done in place
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Whether it’s silicone coming away from the tiles and stained silicone, we can generally put it right, whatever the material.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Paxcroft Mead (BA14)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Paxcroft Mead and the surrounding area
Paxcroft Mead is about 1 mile east of Trowbridge, in Wiltshire. We visit homes and businesses in Paxcroft Mead and nearby villages, so you do not need to take anything anywhere. We cover all 425 towns and villages across Wiltshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 80 miles away.
Our visits in BA14 work the same way as everywhere else we cover. From Garth Road, Green Lane and Corbin Road or anywhere nearby, a technician can come to you. Close by, we cover Hilperton (1 mile north-west), Ashton Common (2 miles east), West Ashton (2 miles south), Semington (2 miles north-east) and Steeple Ashton (2 miles east). Larger places within reach include Chippenham (10 miles north), Calne (11 miles north-east), Devizes (9 miles east), Westbury (4 miles south), Melksham (4 miles north-east) and Warminster (8 miles south).
Landmarks near Paxcroft Mead
Our customers here include homes close to St Augustine's Catholic College, The Mead Community Primary School and Church of St Michael and All Angels and the streets around them. For rail, the closest station is Trowbridge station, about 1.3 miles west of the centre. Further afield, we also cover the area around Castle Place Shopping Centre (1 mile west) and Trowbridge Castle (1 mile west).
- Other local spots include West Wiltshire (1.4 miles west)
Why reseal now?
Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. A proper reseal removes the old first. The price reflects the work involved, not your postcode. You will see the full price before you book.
Why us?
- Every repair guaranteed for a year
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
See our pricing.
When a repair is not the answer
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
- Loose tiles, which need refixing first
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Baths
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
Also near Paxcroft Mead
More services for Paxcroft Mead
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Questions from Paxcroft Mead
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
How do I book?
Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.
What does bath resealing cost?
The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Can new silicone go over old?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Paxcroft Mead.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you need bath resealing in Paxcroft Mead?
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
Send us a picture if you notice any of these:
- Black mould in the sealant
- An untidy old seal
- Gaps in the seal
- Leaks at the edges
Before booking anyone
- What prep work is covered
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- How soon you can use it again
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Clean the joints with a mild cleaner
- Store bottles on a shelf
- Open a window after bathing
- Use the extractor fan
Let it cure fully before using the bath or shower, normally around 24 hours.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We clean up when we’re done and tell you when it’s ready to use.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Ensure the room can be ventilated
- Ensure the area is dry
- Clear the area around the damage
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
